Jump to content
SAU Community

Recommended Posts

theres going to be new speed limits enforced in SA .. apparently as of 1st of march ... where ever there is no sign for 60 ... the limit will be 50 which means lots of suburban areas ... dont' u all think this is a load of bull sh*t?? this is just an inconvenience to people ... and a big revenue raiser for the idiots in government!!

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/
Share on other sites

Agreed, but to tell the truth, when they did this in WA, it didn't really make much difference to travel time etc - just a real PITA trying to remeber to slow down - 'sides I can see 2 good things coming from this

1) I wont have to be constantly changing between 3rd and 4th every time someone slows 5 kays then speeds up again, and

2) Less likely to damage my car (or my kidneys) on the very ordinary roads that exist on smaller streets.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-170566
Share on other sites

I'm surprised it took as long as it did to bring SA into line with the rest of the country. Most of (if not all?) the other states have had 50km/h suburban limits for quite a while now.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171299
Share on other sites

on small suburban roads i don't think i even get near 50km/hr ... it will be just like speed cameras ... not saving any more lives ... just making more money ... and then when they start using speed cameras in spots where people are going 60 in a 50 zone in their own suburb and start getting fines ... then people will start complaining ...

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171332
Share on other sites

I don't agree with the 50km/h policy, & I have no doubt it's more about revenue than road safety, but I'm still surprised it took as long as it did for SA to adopt the 50k limit.

I think we all know that reduced speed limits are a win-win situation for the government. They "appear" to be serious about road safety by reducing speed limits & running big ad campaigns & the like. Then they sit back & reap the $$$ from fines revenue. It's a small outlay for a HUGE return & all the while they look like road safety is their primary concern ;)

If road safety "really" were the issue here speed cameras would be on blackspots not dead straight open stretches of road. Driver education, advanced driver training/courses & tougher licensing would be of major importance. And finally, ad campaigns would be aimed @ increasing awareness of basic road rules that are important to improved traffic flow (like "KEEP F#@KING LEFT UNLESS OVERTAKING!!!!).

sm_soapbox.gif

Rant over.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171406
Share on other sites

KEEP LEFT UNLESS OVERTAKING - is my #1 pet hate for other road users. Signs are posted every 2km or so along the freeway, yet people are so blind/ignorant/ arrogant to take notice. Getting stuck behind a KC laser doing 100 while next to a semi doing the same speed is frustrating.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171461
Share on other sites

Perhaps someone should point out to the bean counters the revenue they are missing by not enforcing this rule.

Seems to me that most people are responsible with speed and will only drive to the conditions, an occasional person drives a bit silly - but so many other people have to get picked up for going a few kays over the limit before the idiot driver gets done - and chances are the fine wont slow down the idiot driver.

NB when I say idiot driver, i am talking about irresponsible dicks who like speeding in dangerous places, eg heavy traffic, near schools and small suburban roads etc.

Govt 1, public 0. Its a shame the revenue doesnt go back into roads and driver education.

Hey, this rant thing aint too bad, eh whatsisname...lol

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171500
Share on other sites

I guess we have to pay for these assylum seekers somehow..

Freakn Govt.

IMO 60 isn't too fast. Running red lights and doing 60 in school zones appears to be a bigger problem.... 50kay's is still gonna clean up the kid at the school crossing and no doubt kill him but.

Some accidents are unavoidable, but i dont think lowering the speed will fix up these problems. Maybe a bit more common sense on the drivers behalf would improve the problem.

There's a time and place for speeding......excessily..AIR, Mallala and the express way, Not in the street. But there's no way that 60 is too fast.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-172269
Share on other sites

Originally posted by TIMMMAYYY

Maybe a bit more common sense on the driver’s behalf would improve the problem

Yep, that's exactly what's needed. As I posted above, on-going driver ed programs, compulsory advanced driver training, much tougher licensing systems (as per the bike system), ad campaigns covering a wide range of road issues, improvement of roads, the list can go on…….

The reality is though, these things all COST the government money rather than making more $$$. Faaar easier to reduce the speed limits, fine the hell out of everyone & then manipulate the statistics to show the measures they’ve taken are working.

I posted some figures a while back that showed the number of speed cameras in SA, revenue raised & the fatality rate over a 10 or so yr period. No surprise to see stuff all reduction in fatality rates, 500% increase in revenue & tenfold the number of cameras in action. (These fig’s might be a tad out but ya’ get the idea).

I might run for local parliament – Independent candidate “ Anti Speed Camera Party” My one & only policy - The total removal of speed cameras within the yr :D

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-172491
Share on other sites

50km!!!:thumbdwn:

Signs should read -

Keep left unless overtaking - & if a Skyline,EVO, or any turbo car

is behind you pull over to the side of the road & get the bloody hell out of the way.

Hmmm. might not fit too well.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-172845
Share on other sites

Cool! So the Anti Speed Camera Party would get a few votes then. Thanks guys :D

Gotta' love it, not more than a day after my ranting about fine revenue & the media cotton onto the $800per HOUR that SA speed cameras are making to fill state coffers!

800 F@#KING DOLLARS, PER HOUR, 365days a yr!

Now in reponse to this the transport minister (or some other weasel) has stated "It's all up to the driver, don't use the right foot so heavily & you won't have a problem. "The choice is in the drivers hands (or foot)" Yep ok, fair call I say.

However, while it's up to us as drivers to decide what speed we travel, when do we get a say on what speed limits are set & where!?

I can see this state ending up the same as NSW, speed limits reduced well below what's really needed. Areas that were once 100km/h dropped to 80km/h. 80 zones down to 60 & so on & so on....

Just so you guys don't think I'm some kind of speed crazed fool, I completely agree with low speed limits for built up areas, schools etc... nothing faster than 150km/h in these areas :D

Erica,

That's the funniest thing I've read for a while :lol:

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-174601
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
    • This seems like a pointless exercise. There is no E30 availability. Ongoing availability of E85 should not be assumed. Flex-fuel is the only sensible approach, so you can use E85 when and where you can get it, 98 when that's al you can get, and anything in between as you fill it up and drain it down. And if that means replacing the pumps, fitting a flex capable sensor/ECU/whatever has to be done to these Renault shitboxen, then.....so be it?
×
×
  • Create New...