Jump to content
SAU Community

Recommended Posts

I had to go to the post office earlier today and went down the road to the local westfield in figtree (it is in wollongong). I was no more than 15 minutes inside the centre when i returned to my car and saw that just behind the back right wheel some idiot scraped his car down the side of mine.

Now i usually park as straight as i can right in the middle of the parking spot as i dont want any people to hit my doors with theirs. Now it looks like i have to worry about people not knowing how to reverse out of a spot.

Seriously, it is very frustrating. Some drivers must judge the amount of space they have left by saying, "when i hear a thud or a grinding noise i know thats when i have enough room, but what the hell, i'll keep going anyway."

Damage isn't as bad as it could of been i suppose. Good thing my uncle is a panel beater and owns his own shop so he can fix it back up at a low price (cost if materials and here is a case of beer sort of thing for your time).

Link to comment
https://www.sau.com.au/forums/topic/105950-shopping-centre-carparks/
Share on other sites

be selfish, BE VERY SELFISH when parking, take up 2 spots if you can....because your skyline is more precious than the value of what ever thy are driving

Edited by lingeringsoul
be selfish, BE VERY SELFISH when parking, take up 2 spots if you can....because your skyline is more precious than the value of what ever thy are driving

Ive considered that, but then i read a few comments some guys posted and they said that they get targeted for taking up 2 spaces. :s

You can't win.

yeh your probably more likely to get your car keyed by taking up to spaces. First time I ever took my line to a shopping center some one reversed into when leaving and chipped a little bit out of my rear bar.. and 2 hours proir to that some one reveresed into smashing my reverse light <_<

Some old fart reversed into my fiancee's car today. She was standing right next to the car when it happened and started yelling at him to stop but he was off in old man's land and just ignored her. I try to avoid car parks.

I have the same scrape on the rear wheel arch of the Zed.

Happened in the carpark at work and the black paint on the bumper of a 4wd that often parks next to me gave a pretty good indication of who might have been responsible.

Funnily enough they haven't responded to the note I left on their windscreen saying I think they might have "accidently" touch parked me.

U think thats bad

i work at Castle Hill RSL and ive been hit 3 times in 1 month since i have started working there

First time was my front guard was dented in, then my rear drivers side quarter panel got dented in with a long scrape and 2 days ago my front bar got 3 large scrapes along the side and is almost falling off

there are cameras in the carpark but they cant tell who actually does the damage

Extremly frustrating......i goto work to earn money ...to pay for the damage that i get from working

Ps. i always park in the middle on the lines and infront of cameras

Anyone know what i can do????

damn skyline17, i think your best bet would be to park on the street or possibly buy a sh*tbox runaround car thats not worth much and is also something you dont really car about if something were to happen to it.

Or get a couple of witches hats and put a couple in the spaces next to you.

Bottom line is some carparks are not for people who actually value their car.

Other option is to always park next to cars more expensive than your own :P

that's what I do.. same goes for detering theives... park next to cars better than yours so they take them instead

I've been to about 25 shopping centres in the past few weeks for work, and the amount of dodgy driving and parking that goes on during hte day, you'd be astonished at some of the shit I've seen!

If your parking in shopping centers that have multi storeys, pick a very large pole to park next too... Park one sie as close as possible to that pole, so the person who parks next to you can swing there door open a little more, and the pole will protect at least the other side of your car.

Thats what I usually do and seems to be working quite well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...