Jump to content
SAU Community

Recommended Posts

hey guys and gurls .. i need new rear speakers for r33 series one.. im pretty sure they fit 6inch ??? correct me if im wrong.. i need to get new speakers... but im after sumthing good that will sound as loud as 6x9's ..

Anyone know any models and brands??

wait...

the stock rear speakers are 6ich?

why do i have 6x9s in mine? i HATE 6x9's... they sound so shit in comparison to a 6inch...

i never really looked, plus they have covers over them... im gunna check that out...

PS: i only hate 6x9's cause i normally run a lot of bass, so i dont need any more...

yeh any 6 to 6.5 inch speaker will fit.

being loud will come down to a few things such as what you run the speakers off how much power (wrms not just watts) and the sensitivity.

eg head unit will be about 16wrms depending on brand etc etc. if you run them off an amp that is 100wrms the amp will not distort at the same level as the head unit.

sensitivity has a part as well if your speakers have a sensitivity: 89dB/Wm a speaker that has a sensitivity 91db/Wm needs less power to produce the same sound as that with 89db/Wm.

i hope this helps mr 32

NOT JBL 6.5"!! I finally got around to putting my old amp in the car, and these new 6.5" speakers are terrible!

I'm going to pull them out and put Jaycar's kevlar 6.5" woofers in there, then run them off the amps crossover. Hopefully I won't need to put my sub in the boot!

i forgot the model number but i got fusion 6.5"ers (3 way) and i had kenwood kfc somethin 6x9's and the fusions crap all over for sound quality, loudness everything, i wish i could put them in my front doors but they are a bit too deep and i dont wanna resort to pods in the doors

ben...

I just replaced mine... you'll be looking for 6.5" speakers in the rears, and you'll be looking for 6" in the fronts.

I had to make a custom bracket for my rears 'cos I had 6" Polk's for my rears, and they were a little too small to fit in the stock plastic bracket... and I had to cut the front mounting brackets to fit the fronts!

Sound SO much better now. The stocks were 8w Clarion speakers, with NO surrounds. They'd eroded completely.

Yet to put my sub back in... gotta make myself a custom boot floor before I can do that though.

Hi Ya

If you are still looking to buy speakers for your R33. I have 2 pairs of near new Alpine 6 1/2 in Coaxial 2-way speakers 90watts Peak Output.

They cost me $299 a pair and I thought a fair price would be $150 per pair if you are interested.

I had them installed in a R33 GTR for about 3 months and this was the biggest I could install in the back.

If you are interested I can be contacted on 0407 883 263.

Regards

Duane

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Might piggy back off this thread since there's been a good discussion about PWM.   I purchased a Walbro 460 F90000267 and have been looking into PWM to understand it. It was purchased more of a future proof as my original OEM fuel pump died (r33 below 200kw) and figured I'd just upgrade it to this. That's when it hit me that a pump this big can cause more dramas with such high amperage draw and heating of the fuel pump being on 100% all the time in such a mild setup.   I have a Nexus R3 and slowly collecting power mods but I was looking into the PWM feature on the NSP software:   Then looking at the graph from the fuel pump:     Am I safe to assume reducing duty cycle to 50% for example would make the pump run like a 230/lph ? Where does the PWM come in all of this ?   I've gone down the rabbit hole of PWM fuel pumps and it seems there are many differing opinions on how to go about it 😅  
    • Thank you, this will keep me busy for a bit.  I will update progression.
    • That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
    • Rear turbo is leaky, most likely at the oil drain. From what I could see with my boroscope it seemed to have seeped out at the very top of that return hose. Is it possible that the oil climbs up that hose to then leak out? Yup, coolant leak on the hot side of the engine, only noticed after seeing clear rusty residue in the block right from the turbo oil feed downwards to the pan, and red droplets hanging from the pan. No clear sign yet from where it comes, and most of the lines there are hardlines right? Last year, seeing those red drops, I thought it was power steering, will be glad if that is not leaky at least. Another leaking hose I found by chance is the lower of the two heater core hoses coming from the firewall to the back of the head. That one is not too bad to get to if I have to replace.
    • I think for response I'm already kind of out there no? he -5s are not the best pick for that as the Internet tells me. Maybe I should switch to -7s while I still can? Though that almost definitely warrants an engine pull along with the other issues I have.
×
×
  • Create New...