Jump to content
SAU Community

Recommended Posts

Hey everyone.

Im currently in the middle of modifying my R33 GTST

Top mount manifold

TO4e Turbo

40mm external wastegate

Apexi Power FC with HC

Front mount (600x300x76)

K&N 3" Pod

Bosch 040

Apexi AVCR

Sard Fuel Pressure Reg

Hi Flowed injectors

Upgraded spark plugs

Front facing Plenum

XF Throttle Body

Mandrell Bent 3" Custom cooler piping

Z32 AFM

Oil catch can

HKS SSQV Bov

I'll be on a full licence when its back on the road

How f@#ked over will i be if a cop pulls me over or if i get sent to epa

wat will happen

Is there anything i can do to legalise it

Engineers certificate???

Need Advice fast lol

Thanks for any help u can give.

Cheers

Guesty

Link to comment
https://www.sau.com.au/forums/topic/106481-wat-2-do/
Share on other sites

Dont bother with an engineers certificate as it says on the bottom in huge writing "Valid For Only 30 Days After Inspection Date"

Dont think you can legalize it due to the fact that the turbo and everything else helps to increase your emisions.

The engineers certificate is good for proving structural changes in your car are safe and legal.

Link to comment
https://www.sau.com.au/forums/topic/106481-wat-2-do/#findComment-1963645
Share on other sites

nothing you can do

with a highmount (and a crappy one at that ;)) your 100% f*cked

External Gate - 100% farked

modded plenum/Throttle Body - 100% farked

If i were you, i'd be very careful when/where/how you drive it

If they catch you.

You have to return it to 100% stock.

STOCK everything right down to the injectors and fuel reg :(

Pray to the gods is all you can do on that one

Engineers does not cover EPA in any form.

Link to comment
https://www.sau.com.au/forums/topic/106481-wat-2-do/#findComment-1963690
Share on other sites

  R31Nismoid said:
If they catch you.

You have to return it to 100% stock.

STOCK everything right down to the injectors and fuel reg :)

Pray to the gods is all you can do on that one

Engineers does not cover EPA in any form.

Hey Ash

Is putting in bigger injectors, and an aftermarket fuel reg defectable?

Link to comment
https://www.sau.com.au/forums/topic/106481-wat-2-do/#findComment-1963743
Share on other sites

I know someone with a very similiar setup who was once pulled over by a cop and asked to pop the bonnet and the cops didnt say anything as they looked very confused at what they were looking at in there. :(

Guesty if your gonna do this setup then I would get another car an a daily driver coz u r sure to get done if driven around everyday.

Dark most cops aint gonna pick aftermarket injectors or fuel pres regs easily.

Link to comment
https://www.sau.com.au/forums/topic/106481-wat-2-do/#findComment-1964863
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep. And if you ever do, you'll just have to deal with it then.
    • E10 is pretty tightly regulated in percentage. Too much and engines can't adapt. Every incentive is against them to have too little ethanol though. The more ethanol the higher the octane.
    • Yeah i have R34 with factory small box and now RB25DET NEO swapoed and iam planning to upgrade to big box.  So i would be good as long as i do not change diff? 
    • Based off what you’ve said here, I think I’ve figured out a good bit of what I’ve done wrong -  So on the line going from the PCV valve to carbon canister, there’s a T joint that is pretty much right next to that lower port - I hadn’t noticed that the hose in the diagram was curved to attach onto the carb, so I was putting that line for the lower port onto the PCV line / carbon canister line instead. I’m going to have a flick through the manual again tomorrow and should hopefully find a diagram that’ll show me where that T joint should be connected to. Timing also 100% needs to be sorted out as well, should be able to tackle that tomorrow as well. Definitely feel like I should be on the right track now though. 
×
×
  • Create New...