Jump to content
SAU Community

Importing A Car Question

lows_13
 Share

Recommended Posts

Jade Community Regular

Jade

Posted
Posted
  Beer Baron said:
having imported a number of cars my self i can tell you i have been granted expemtions to import cars pre charged with R12. yes that's right. R12. i'm not sure if you can get a licence to import equipment containing R12 (i think you cant), but you can get 1 off exemptions for R12. 1 per licencing period.

Hi Richard,

I really hate to contradict you ;) but I can tell you 100% positive that R12 gas is an illegal substance and has been since 1996 and no exemptions will be granted from DEH.

This can be confirmed by phoning Jo-Anne Beath who is the team leader of the relevant department at DEH. Her direct number is 02 6274 1603.

Cheers

Jo

Jade Community Regular

Jade

Posted
Posted
  lows_13 said:
Sending it to NZ would be far quicker than sending it back to Japan i guess.

Quote

'both the receiver accumulator and the recharge ports must also be removed'

These are located on the car i assume?

Of course, they are a part of the Air Cond. system.

To put your mind at ease & to be crystal clear on the requirments covering of R12 I recommend you phone Jo-Anne Beath - her direct number is 02 6274 1603.

Cheers

Jo

funkymonkey Grand Master

funkymonkey

Posted
Posted

Series 1 R32's (pre Aug 1991) have R12, Series 2 R32's have R134A

Also, lows_13 I don't know what this import yard is up to. Here's some things to remember:

R12 gas can be disposed of by certified refrigerant handlers (who else would do it when you sign that doc that says "oops? won't happen again") who won't let the gas into the atmosphere but dispose of it properly.

R12 gas can't be degassed on australian soil, however, bond areas in various places around australia (including ports where cars land and are held in customs) are NOT considered australian soil (go figure). So all they had to do is send a certified air con guy to the bond area where they're held to degas it.

Exporting a car to NZ to have it degassed is the biggest load of crock I have ever heard. Either:

1. the import yard has NO clue what they are doing.

2. they are giving some limp wristed excuse to cover up delays in the car, or are formulating an excuse to bump up the price of the car.

Either way I'd be sceptical about handing over money to them if they gave me a story like that. I'm sure their car is great, but that's not how you do business.

Jade Community Regular

Jade

Posted
Posted (edited)
  Quote
Exporting a car to NZ to have it degassed is the biggest load of crock I have ever heard. Either:

1. the import yard has NO clue what they are doing.

2. they are giving some limp wristed excuse to cover up delays in the car, or are formulating an excuse to bump up the price of the car.

Either way I'd be sceptical about handing over money to them if they gave me a story like that. I'm sure their car is great, but that's not how you do business.

Agreed. There is absolutely no reason to export the car to New Zealand. Something is amiss here!

You can make an undertaking with DEH to have the gas discharged and a retro air con system fitted by a licence holder in Australia. This is not an exemption - it is an undertaking and you have 21 days in which to fulfil the undertaking agreement. You need to organise this through DEH

Cheers

Jo

Edited by Jade
Jade Community Regular

Jade

Posted
Posted
  funkymonkey said:
lol how many times are you gonna mention that name and number in a thread?

Umm, as many times as it takes to sink in :dry: so this poor guy can hopefully stop his car from being shipped to New Zealand.

By the way, Jo-Anne Beath & I are not the same person.

Cheers

Jo

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Dude had plenty of time to figure out what was going on, thanks to all the posters on the first page. I even directed him to the DEH.

I thought it was doing it himself - but if he's using an import yard they should know all the procedures by now, and like you I don't know why they'd re-export the car. Sounds like a case of serious incompetence at the least here.

When making a quarantine entry the importer is required to answer questions about the refrigerant inside the car. How this important detail wasn't picked up earlier is pretty bad on their behalf.

Iron Chef Grand Master

Iron Chef

Posted
Posted
  funkymonkey said:
Series 1 R32's (pre Aug 1991) have R12, Series 2 R32's have R134A

Also, lows_13 I don't know what this import yard is up to. Here's some things to remember:

R12 gas can be disposed of by certified refrigerant handlers (who else would do it when you sign that doc that says "oops? won't happen again") who won't let the gas into the atmosphere but dispose of it properly.

R12 gas can't be degassed on australian soil, however, bond areas in various places around australia (including ports where cars land and are held in customs) are NOT considered australian soil (go figure). So all they had to do is send a certified air con guy to the bond area where they're held to degas it.

Exporting a car to NZ to have it degassed is the biggest load of crock I have ever heard. Either:

1. the import yard has NO clue what they are doing.

2. they are giving some limp wristed excuse to cover up delays in the car, or are formulating an excuse to bump up the price of the car.

Either way I'd be sceptical about handing over money to them if they gave me a story like that. I'm sure their car is great, but that's not how you do business.

Exactly what I told him - I've put Low S13 in contact with a guy who can de-gas aircons in the bond area in Adelaide, and yet the importer is still stuffing around. I suspect there's something else going on, like a stuff up on the import approval or something, but we shall see.

BTW - I read Jo-Anne's surname as BREATH, which is kinda sexy. Is she hot Jade? Do you have her number? lol

Jade Community Regular

Jade

Posted
Posted
  vrfour said:
BTW - I read Jo-Anne's surname as BREATH, which is kinda sexy. Is she hot Jade? Do you have her number? lol

BREATH would be quite funny considering she is the senior Policy Officer of the Government Environment Protection Division that is responsible for Ozone and Synthetic Gas :P

Can't help you in the looks department though, I've never met her.

Surely the number has sunk in by now LOL

Cheers

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...