Jump to content
SAU Community

Recommended Posts

Hi Guys,

I had my R33 serviced the other day and was advised my shocks need replacing.

Rear shock is leaking oil. My skyline is a everyday car and I wanted to replace them with standard shocks. I just have a few questions.

* What’s a good brand to get?

* Can i install them myself? or i need clams and better off giving it to the mechanic to do because a few things can go wrong?

* Will the height of the car drop if I change my shocks?

Any feed back would be great!!!!

Cheers :)

Babylon

Hi Guys,

I had my R33 serviced the other day and was advised my shocks need replacing.

Rear shock is leaking oil. My skyline is a everyday car and I wanted to replace them with standard shocks. I just have a few questions.

* What’s a good brand to get?

* Can i install them myself? or i need clams and better off giving it to the mechanic to do because a few things can go wrong?

* Will the height of the car drop if I change my shocks?

Any feed back would be great!!!!

Cheers  :D

Babylon

There is a Group Buy open at the moment, I think it answer most of your questions. The link follows;

http://www.skylinesaustralia.com/forums/in...showtopic=85467

If you have any further questions, please just PM me or post it up here if you want.

:) cheers :

Depending on the cost, I'd look at a better aftermarket shock instead. Aftermarket doesn't necessarily have to mean insanely stiff.

You could source a set of Koni Red non-adjustable sports shocks, and if you can afford it maybe a set of comfort shocks (like Eibach progressive rate springs) to go with them.

If you have a look at the Euro cars, most of them are set up to handle quite well without a back breaking ride. It's not going to challenge a Jap coilover equipped car on the track, but I'm quite fond of the regular BMW 3 Series' suspension setup for street use. It goes where you point it approximately when you point it, unlike your average Camry / Magna / Falcodore, but it absorbs bumps almost as well as they do.

coolies

im thinking of getting pedders

if i replace the rear shocks will i have to replace the fronts?

and would i also have to replace the springs as well?

Sydney Kid - i read that forum i cant make out how much it is for a set of those shocks just for the rear?

Edited by Babylon
1. Sydney Kid - i read that forum i cant make out how much it is for a set of those shocks just for the rear?

1. Bilsteins are $486 for the pair delivered as per the Group Buy. Front and rear are the same price, so $972 for all 4 delivered.

2. im thinking of getting pedders

2. Ouch, not a good idea, cheap and nasty (very nasty).

3. if i replace the rear shocks will i have to replace the fronts?

4. and would i also have to replace the springs as well?

3. Nope, but it would be a good idea to maintain the balance. Old, worn, standard shocks are not really comparable to aftermarket, brand new, sports shocks.

4. Definitely not, the Bilsteins will work very well with the standard springs. You can even lower it a bit using the extra circlip groves.

;) cheers :P

is there any workshops in western subs to install those shocks?

Recommended fitters are in the Group Buy thread.

Heasmans Sydenham NSW

East Coat Suspension Kirrawee NSW

St George Steering Punchbowl NSW

Centeline Thomastown Vic

Traction Tyre & Suspension Rowville Vic

Discount Tyres Service Belconnen Act

:P Cheers:)

  • 2 weeks later...

what do the pedders ones cost

you can get fixed Koni ones for about $200 each or adjustable like me for about $300 each. mine is an everyday driver and i have tham set to full stiffness and you do get used to them. or just have them soft for day to day and stiff if you wana hit the track or just go out for a cain

what do the pedders ones cost

you can get fixed Koni ones for about $200 each or adjustable like me for about $300 each. mine is an everyday driver and i have tham set to full stiffness and you do get used to them. or just have them soft for day to day and stiff if you wana hit the track or just go out for a cain

i ended up gettting some a pair of standard shocks

some jap brand forgotten the brand name

i think it starts with J

$215 for the pair

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
×
×
  • Create New...