Jump to content
SAU Community

Recommended Posts

Hi Guys,

I had my R33 serviced the other day and was advised my shocks need replacing.

Rear shock is leaking oil. My skyline is a everyday car and I wanted to replace them with standard shocks. I just have a few questions.

* What’s a good brand to get?

* Can i install them myself? or i need clams and better off giving it to the mechanic to do because a few things can go wrong?

* Will the height of the car drop if I change my shocks?

Any feed back would be great!!!!

Cheers :)

Babylon

Hi Guys,

I had my R33 serviced the other day and was advised my shocks need replacing.

Rear shock is leaking oil. My skyline is a everyday car and I wanted to replace them with standard shocks. I just have a few questions.

* What’s a good brand to get?

* Can i install them myself? or i need clams and better off giving it to the mechanic to do because a few things can go wrong?

* Will the height of the car drop if I change my shocks?

Any feed back would be great!!!!

Cheers  :D

Babylon

There is a Group Buy open at the moment, I think it answer most of your questions. The link follows;

http://www.skylinesaustralia.com/forums/in...showtopic=85467

If you have any further questions, please just PM me or post it up here if you want.

:) cheers :

Depending on the cost, I'd look at a better aftermarket shock instead. Aftermarket doesn't necessarily have to mean insanely stiff.

You could source a set of Koni Red non-adjustable sports shocks, and if you can afford it maybe a set of comfort shocks (like Eibach progressive rate springs) to go with them.

If you have a look at the Euro cars, most of them are set up to handle quite well without a back breaking ride. It's not going to challenge a Jap coilover equipped car on the track, but I'm quite fond of the regular BMW 3 Series' suspension setup for street use. It goes where you point it approximately when you point it, unlike your average Camry / Magna / Falcodore, but it absorbs bumps almost as well as they do.

coolies

im thinking of getting pedders

if i replace the rear shocks will i have to replace the fronts?

and would i also have to replace the springs as well?

Sydney Kid - i read that forum i cant make out how much it is for a set of those shocks just for the rear?

Edited by Babylon
1. Sydney Kid - i read that forum i cant make out how much it is for a set of those shocks just for the rear?

1. Bilsteins are $486 for the pair delivered as per the Group Buy. Front and rear are the same price, so $972 for all 4 delivered.

2. im thinking of getting pedders

2. Ouch, not a good idea, cheap and nasty (very nasty).

3. if i replace the rear shocks will i have to replace the fronts?

4. and would i also have to replace the springs as well?

3. Nope, but it would be a good idea to maintain the balance. Old, worn, standard shocks are not really comparable to aftermarket, brand new, sports shocks.

4. Definitely not, the Bilsteins will work very well with the standard springs. You can even lower it a bit using the extra circlip groves.

;) cheers :P

is there any workshops in western subs to install those shocks?

Recommended fitters are in the Group Buy thread.

Heasmans Sydenham NSW

East Coat Suspension Kirrawee NSW

St George Steering Punchbowl NSW

Centeline Thomastown Vic

Traction Tyre & Suspension Rowville Vic

Discount Tyres Service Belconnen Act

:P Cheers:)

  • 2 weeks later...

what do the pedders ones cost

you can get fixed Koni ones for about $200 each or adjustable like me for about $300 each. mine is an everyday driver and i have tham set to full stiffness and you do get used to them. or just have them soft for day to day and stiff if you wana hit the track or just go out for a cain

what do the pedders ones cost

you can get fixed Koni ones for about $200 each or adjustable like me for about $300 each. mine is an everyday driver and i have tham set to full stiffness and you do get used to them. or just have them soft for day to day and stiff if you wana hit the track or just go out for a cain

i ended up gettting some a pair of standard shocks

some jap brand forgotten the brand name

i think it starts with J

$215 for the pair

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...