Jump to content
SAU Community

Recommended Posts

It will be near impossible to remove it completely. I rented a place before with a really stuffed up driveway. Everytime I drove up the driveway, my inside wheel would spin. After about 8 months, there was a pretty thick tyre track on the ground.

We tried petrol, kero, turps, everything. We tried scrubbing it with the chemicals mentioned above. We tried applying the above chemicals, then lighting them on fire. We tried using a gas cylinder as a flamer to try and burn it off.

While all these made it better, it was still quick noticeable.

Just paint over it and be done with it.

yeah ive had the same problem at a place i rented ages ago. i found using a wire brush and a heap of washing powder (nappy san or similar). Have ya tried a pressue washer/gurney, or HCL over the marks, if that doesnt work then ur probally screwed. ;)

god. i read you post and i PMSL ;)

anyhoo citroclean is agressive as. it removes polish off the floor so it should make a dent in it at least. try a few application of it to remove it. ie put it on and attack with a stiff brush, wait a little then put more on and attack it again.

anyone tried CLR?

if all else fails buy some grey paint lol

Your local auto parts supplier should have a range of concrete cleaning products.

I used one a while ago, very caustic stuff, did a good job of removing oil stains, but I don't know how it would go with rubber. (I guess essentially they're the same compound?)

Hose the area, dump the powder on, scrub it, let it sit a bit, then hose it off.

But if you're going to use anything like that, suit up well.. it burned little pitted holes into my leather work boots.

I used one a while ago, very caustic stuff, did a good job of removing oil stains, but I don't know how it would go with rubber. (I guess essentially they're the same compound?)

Theoretically yeah, they're both hydrocarbons. Which means they should both react (to a certain extent) to other hydrocarbons, especially volatile liquid ones (kerosene or petroleum solvents).

I still pity the fool that shits in his own backyard.

I still pity the fool that shits in his own backyard.

God invented rental properties so that people could shit in their own backyard, then move along to the next place when the shit can is full :D

Be mindful with whatever you're using that it's possible that anything that would dissolve the rubber by making it softer is likely to sink into the concrete (especially if it's really porous).

Obviously if whatever you're using eats all of it away that's fine, but sometimes chemicals tend to do a half assed job.

alternatively... soak your tyres in diesel, then proceed to drive up and down the driveway evenly.

then give the landlord a bill for treating the driveway with waterproofing silicone.

i used to work at Golden Circle, and they got this stuff that'll burn the skin clean off your hands...

wen u squeeze the peel of an orange u get this acidic juice... they process the stuff into wat Golden Circle call "citrus oil"

if you can find that, u got no worries

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
    • I have a wheel cleaner pokie thing which is a glorified microfibre rag on a stick, and there is not sufficient clearance between the caliper and the barrel to clean that section. I just roll the car forward 500mm and have another shot at each wheel.
    • The "rag on a stick" is a easy way to fit in between the wheel spokes into all of the barrel Albeit I do have 10 spokes on the MX5 which limits the access to actually jam my hand in to clean the barrel, but it was also makes much easier to clean the 5 spokes on the Dunnydoore with it as well, as you don't have to worry theΒ  caliper getting in the way if you have at least about 15mm space between the caliper and barrel This of course depends if you actually have the clearance between the barrel and caliper, and the amount of OCD you have to get the barrels as clean and shiny as the face of the wheel The thing is bendy as well so you can actually shape it to conform to the inner lip of the barrel Β 
    • FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.Β Β  Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
Γ—
Γ—
  • Create New...