Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Yes i tend to agree, my ECU was tuned by a local tuner. I did ask him to go easy as I want to be on the safe side.. I would however like to go further than 6800RPM my japanese cutoff was set at 8200RPM I still wonder how comme my 400 injectors lean out, or is it the tuning/turbo.. I wanna start downloading ecu .bin soon enough to see how my fuel map is..

And yeah 94 octane gas is as good as it gets here but I've seen/read that 94 here is about like 98 japanese octane...

is running that rich leaning out my injectors when I pump the boost up?

What sort of fuel pump are you using?

Unless you fuel pump is capable to flowing enough fuel to hold solid rail pressure at higher injector dudty cycle you will see it start to lean out.

Also if u are using the stock afm that may cause a problem as it may be maxing out aswell.

Increasing timing wont reduce your boost threshold. In fact It will do the opposite. There is a big compromise here between lag and power.

So if you actually run very retarded timing it can cause the fuel mix to burn very late while leaving the cylinder and hence a sort of antilag?

Hmmmmmmmm I can see how this would work.

i doubt it, antilag works by adding extra fuel in to burn in the manifold and thus give extra exhaust gasses. changing timing enough will just cause a late burning of the mixture but its still the same amount of air/fuel, so still pumping out the same amount of exhaust gasses, just burning later

maybe the higher EGT's will help though

Edited by mokompri

RedDrifter I have

-440 Injectors

-Z32 MAF

-GTR Fuel pump

-GTR intercooler

-2.2L Tomei engine Derive I

I didn't have a boost gauge when the guy ran the dyno so I do not know if it's the boost that drops above 6800.. I'll repost my graph here to help you guys

dynorun3.jpg

You can see the A/F leaning around 6800...

Edited by klys
So if you actually run very retarded timing it can cause the fuel mix to burn very late while leaving the cylinder and hence a sort of antilag?

Hmmmmmmmm I can see how this would work.

Yes, thats exactly correct, problem is that you will have heaps of boost but very little power, hence the compromise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...