Jump to content
SAU Community

Recommended Posts

Wow, they are some nice brakes....

I got DBA4000's fitted to my car not long ago and i have to say they are much better than my old, warped brakes. They werent standard R32 GTR brakes I dint think because the were cross drilled. These look so poor compared to those AP's and Brembos :domokun:

dba40008mx.th.jpg dba40018fk.th.jpg dba40029bv.th.jpg

  • 1 year later...

hey brian. thanks heaps for sorting out my teathing problems with my f40 brembos and your custom 355mm two piece rotors on my gtr.

still shakes a little but is bearable.

ps. im getting some k-type alcons to replace the brembos so i can sell te old set up as a complete kit.

I have a set of Brembo F50's (355mm) on my R32 GTR and they are a $5000 proposition for the fronts only.

Bremb01.jpg

Brembo1.jpg

Definate improvements in feel on the track however standard Brembo pads seem a little more road than track orientated.

What type of aluminum are AP calipers made from? Are they forged? heat treated? cast then machined or billet?

They are a 2 piece caliper. So the material grade is less important than for a 1 piece as the steel through bolts are ALOT stronger & stiffer at elevated temps.

Try the APRacing website.

Brian, What would you use to duct cool air to the rotors, mine seem to get hot and cause a bit of fading by the end of 3 hot laps.

Cheers

Paul

Good question, i'm interested in ducting as well..... and what people have done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...