Jump to content
SAU Community

Recommended Posts

hmmmmmm,ive just read this thread from start to finish

some....well how can i say......interesting claims have been made

but so be it .

i personaly am not a fan of unforged handgrenade[highly researched] motors but each to there own.

and well done on your um research

i dont know why people doubt the engine

it has run the times and mph

lets see what its capable after i have done the cage and return to the drags apart from that i aint posting no more in this thread waste of time

too many people who dont respect things and other peoples reasearch

But the thing is can it do it for 12 months or more?

Thats what determines reliable in my book. Putting solid KM's on a motor

I ran around 330-350rwkw through a built RB25 with laods of dyno runs and 1/4 passes and many km's on the street, and i learnt a lot doing so.

Hence seeing the stock motor inspected for stress after more than a few months etc will be interesting.

12-18months will be the test in my book

well a lot of people dont think you've done any research, and this is why they doubt it and or ignore you. also a lot of people value their engines and don't have unlimited money so they would prefer peice of mind over saving for the cost of a set of forged pistons and proper internals vs running the stockers on the the borderline of catastrophic failure

But the thing is can it do it for 12 months or more?

Thats what determines reliable in my book.

I ran around 330-350rwkw through a built RB25 with laods of dyno runs and 1/4 passes, and i learnt a lot doing so.

Hence seeing the stock motor inspected for stress after more than a few months etc will be interesting.

12-18months will be the test in my book

if you want me to test this then i will

i wont boost it anymore or anymore nos to see how long it last

im more then happy to do so as its making more then enough power as it is and im still having fun

just have to put the other motor on a crate.

its lasted a total of 6 month 1 week so far

its only been listed on the forums for 4 months or so

i also dont drive the car like a grandma it cops more punishment then anything and any car i know.

well a lot of people dont think you've done any research, and this is why they doubt it and or ignore you. also a lot of people value their engines and don't have unlimited money so they would prefer peice of mind over saving for the cost of a set of forged pistons and proper internals vs running the stockers on the the borderline of catastrophic failure

very true i fell the same but i thought ill give this a try and its working pretty damn fine ive got my race motor at the shop ready if anything does happen as i have stated many times in this post,but as many people thought it wouldnt and would blow up straight away it hasnt.

im very impressed in the motor and how much it has handled.I wouldnt mind seeing a low 10 as the car is able to do it.ill post more as i go on the times i am running and when it blows picts of the internals.

There are two 240sx's in the US that are making 500+ whp on stock RB25 motors. One is a neo motor and the other is a series II motor.

The Neo motor dynoed 587 whp without opening the motor up. It has a custom intake and turbo manifold. He ran an 11.1 his first time out.

The other 240 has ran consistent 10's on stock motor.

Then he put a headgaster/studs and cams on and is now in the 9's. Last I heard his tranny broke and he is now running a powerglide tranny.

The US dyno readings compared to our dynos are somewhat "higher"... not the best of example, but i guess one none the less

they are a lot higher than our ausie dyno readings.. lol damn yanks trying to show off

There are two 240sx's in the US that are making 500+ whp on stock RB25 motors. One is a neo motor and the other is a series II motor.

The Neo motor dynoed 587 whp without opening the motor up. It has a custom intake and turbo manifold. He ran an 11.1 his first time out.

The other 240 has ran consistent 10's on stock motor.

Then he put a headgaster/studs and cams on and is now in the 9's. Last I heard his tranny broke and he is now running a powerglide tranny.

Very interesting

but there not skylines.i could put this motor in a gemini and run mid 9`z now couldnt I

power to weight ratio is a big difference

but interesting to see some1 makeing power out of this motors

I dont know wy ppl are riding him. The fact is he has enough bolt ons for this thing, its no surprise it makes the numbers.

On a std engine is surprising, but think about the duration in which the engine is under load and i suspect many engines can handle hits for short durations...when they will catch up with this motor? Well it can only be a matter of time until its bottom end lets go, maybe not a piston or rod...but surely a bearing as the thing is still running std oiling sytstem. Will it be another 6 months, 6 days? Isnt that what he is tryign to find out?

Anyway, best of luck with it, i just wish some bloke would do this with a RB20. Its funny years ago anymore then 230rwkws and ppl thought RB25s needed pistons. Then it was 250. Now in NSW there are a few cars gettign around with 300-330rwkws so perhaps with better turbo setups and tuning these numbers are more realistic.

LOL...that said do a flat knacker 8 laps at EC and i bet the engine will give up:)

You guys are all dyno freaks, who gives a shit about dyno figures. The ET and MPH tell the story.

The US dyno readings compared to our dynos are somewhat "higher"... not the best of example, but i guess one none the less
LOL...that said do a flat knacker 8 laps at EC and i bet the engine will give up:)

For me that is the key aspect of the whole debate. Outright power is one thing. Durability at whatever power the car develops is quite another. Protracted high speeds or loading WILL expose weaknesses.

Who wants bent rods / broken pistons / valve train issues / oil starvation / heat management problems because the owner/builder skimps on the build? Best long-standing advice is to run what you can afford to break.

For me that is the key aspect of the whole debate. Outright power is one thing. Durability at whatever power the car develops is quite another. Protracted high speeds or loading WILL expose weaknesses.

Who wants bent rods / broken pistons / valve train issues / oil starvation / heat management problems because the owner/builder skimps on the build? Best long-standing advice is to run what you can afford to break.

It's not like he's suggested that he built it for circuit work. It's obviously a drag car. Don't criticise it for not being a capable circuit/drift/burnout car when nothing of the sort has been claimed.

Wake up to yourselves.

Adrian

very interesting thread....

i believe jason and his high power claims and 10second 1/4 times...

.... however i do feel your a bit agressive mate. if some one is a smartarse or anything like that, i believe you should let it slide and keep your focus on ppl who are supporting you. as hard as it is to practice what i preach.

my 2c. cheers. james.

ps. well done on your work ;)

The US dyno readings compared to our dynos are somewhat "higher"... not the best of example, but i guess one none the less

Maybe your dyno readings are all low AND Incorrect. Ever thought about that?

It's not like he's suggested that he built it for circuit work. It's obviously a drag car. Don't criticise it for not being a capable circuit/drift/burnout car when nothing of the sort has been claimed.

Wake up to yourselves.

Amen.

It's not like he's suggested that he built it for circuit work. It's obviously a drag car. Don't criticise it for not being a capable circuit/drift/burnout car when nothing of the sort has been claimed.

Wake up to yourselves.

Adrian

The point of the comment was not to be critical of a drag machine - moreso to voice an opinion on the financial risk that comes with a high-stress / short-duration drivetrain used in anything other than that environment.

Best of luck to him and enjoy, I reckon. That's what modifying cars should be about.

FWIW, the best advice is still to run what you can afford to break.

cheers

Edited by Dale FZ1
Who wants bent rods / broken pistons / valve train issues / oil starvation / heat management problems because the owner/builder skimps on the build? Best long-standing advice is to run what you can afford to break.

Yeh but nah :D

He hasnt built anything, its a std engine. So who cares if it lets go. Even if its a catastrophic failure and rods go through the block, and the head gets damaged etc, it wont add a great deal to the cost of a fully built engine...say 6.5k instead of 6k?!?!?!

...i agree with the statement run what you can afford to break...but its a std engine..so doesnt owe him anything, it came with the car.

Its just liek the 400rwkws street GTRs, how often will any of these cars actually see full boost on the street. I suspect they are less stressed then std motors that have more mid torque and ramp onto boost more regularly on the street. Take it to a track and fang it hard for 10mins and it will be a different story...but you tweak your car to best suit what you do with it...

Just a quick question, you say you have a gt3540 - just wondering what specs as mine has the 0.82 rear and is making 480rwhp with slight compressor surge (meaning the turbo has run out of flow) and 24psi, mine also sees full boost early 4000rpms - just after a comparison with when yours sees full boost as im assuming you have a 1.06 exhaust

And congrats on the power and qtr time

Edited by turbo87
Just a quick question, you say you have a gt3540 - just wondering what specs as mine has the 0.82 rear and is making 480rwhp with slight compressor surge (meaning the turbo has run out of flow) and 24psi, mine also sees full boost early 4000rpms - just after a comparison with when yours sees full boost as im assuming you have a 1.06 exhaust

And congrats on the power and qtr time

thanks mate

im running a 1.06 rear housing

and 18 psi of boost

the car is a street car and is going to be continued driving on the road once the cage is in it

i havent driven it in 2 weeks due to ecu upgrade and cage.

like i said ive got my other motor waiting there and will put that in when this blows up but it wont

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Already looked at a few prior to getting the MX5, really nice car, had all the mod cons, but I wasn't really sold on the new "look" I did miss my 2017 Limited, and I personally prefer the "look" of the older car over the new model, but, when pondering I kept going back looking at MX5's But it was same same for the new ND's, I wasn't sold on the new "look", especially the RF with its weird roof, which only half goes down, like a targa top sort of thing As I stated before, I did look at NC's, but the cars I looked at were PRHT's, but I didn't like their roof line "look" of the PRHT, until I saw the soft top version, (someone on SAU posted a for sale ad for one with a soft top that caught my attention, you can blame them for my choice.....🤣) and.... that old style detachable hard tops were available for them, which keeps the old MX5 more smoother flowing roof line, and the more rounded body style, similar to the NA-NB, to me, the arse end of the ND looks to "modern" Much like how I prefer the NC1 front bar, over the later models How long will I keep this car for is unknown, but currently, there's nothing else out there that "floats my boat" for a small, fun, little "sports car", that I can play with and enjoy looking at and driving But, who knows what the future holds, and going off current new car styling, if I replace it, it will be a older model something something       
    • looking forward to your t56 swap man its a game changer if it works! 
    • So, when are you trying the new GR86 or BRZ?
    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
×
×
  • Create New...