R32gtr Hats And Brackets

[Ronin 09]

I have a set of AP CP5555 calipers and 355x34mm rotors.

I need to get the hats and brackets made up to fit an R32GTR.

1. does anyone know who can do this (race brakes want $600 for the brackets, $750 for the hats!) for umm... less?

2. is the 300zx mounting / offset the same as R32GTR, if so I may be able to use a 300zx set of hats and brackets from the USA

Cheers

[Beer Baron]

ronin=HARD COREY!!!

i like it.

[Bl4cK32]

I have a set of AP CP5555 calipers and 355x32mm rotors.

I need to get the hats and brackets made up to fit an R32GTR.

1. does anyone know who can do this (race brakes want $600 for the brackets, $750 for the hats!) for umm... less?

2. is the 300zx mounting / offset the same as R32GTR, if so I may be able to use a 300zx set of hats and brackets from the USA

Cheers

well z32 is the same as r32 gtst. I replaced my r32 gtst calipers with r32 gtr. offset is the same, except for the diameter of the rotor, which the gtst is 280x30mm, and the gtr is 296x32mm?

So no z32 mounting is not the same as the 32gtr., its the same as the r32gtst

[Ronin 09]

ronin=HARD COREY!!!

i like it.

haha guess what they came off a Hummer!

[Roy]

haha guess what they came off a Hummer!

Shuddup

Z32, R32 etc etc are all the same. The only difference is the offset for the rotor. So if there is brackets for a 355 x 34mm rotor using a CP5555 available in the states then it shoudl be the go. Secondly, to do the hats you will need to knwo the brand of the rotor, and shoudl be available off the shelf somewhere

Now soddoff with your fancy brakes and pretty GTR

[Ronin 09]

you must be sleepy mr roy

[Roy]

you must be sleepy mr roy

Never suffered from d1ck envy, but right now i have AP/Ohlins envy:D