Jump to content
SAU Community

Recommended Posts

Hi All,

It's that time again for SAU VIC's DECA Motorkhana fun day.

This will be held at the lovely DECA facility in Shepparton VIC.

There will be our usual convoy cruises for both the Friday night crew and early Saturday morning. Of course you can travel in your own time accordingly but it is much easier in a group, and more fun. Previously we were meeting at McMobil on the Hume Hwy but now that the bypass is open it may be more convinient for others so we are all meeting there.

Meeting point address

Shell Roadhouse

Hume Hwy

Donnybrook VIC 3064

Melway 365 C5

DECA Address

145 Wanganui Rd Shepparton

There will be two official convoy's heading up to DECA next weekend.

Friday 24th February - Night convoy

Meet at Shell Service Station, Hume Hwy, Donnybrook - Depart 8:30pm. Paulr33 + Jamezilla to lead the Convoy.

Saturday 25th February - Morning convoy

Meet at Shell Service Station, Hume Hwy, Donnybrook - Depart 5:30am. BassJunky to lead the Convoy.

Some important notes;

  1. Please bring CB radio's to assist in communication during the convoy
  2. This is open to non members if you wish to come up and spectate
  3. We have a wide range of cars running on the day from full race spec cars to daily streeters
  4. BBQ will be provided for specators and competitors with cheap food
  5. Just a reminder that officials MUST be there (at DECA) no later than 8.15am on Saturday morning

Directions from Shell Service Station - Hume Hwy

Start at HUME HWY, DONNYBROOK - 7.64 km 9 Mins

Continue along HUME HWY, DONNYBROOK - 15.97 km 18 Mins

Continue along HUME HWY, MELBOURNE REGIONAL DISTRICTS - 12.78 km 10 Mins

Continue along HUME FWY, HEATHCOTE JUNCTION - 47.35 km 37 Mins

Continue along RAMP > GOULBURN VALLEY HWY, MANGALORE - 79.51 km 1 Hr 5 Mins

Continue along WYNDHAM ST, SHEPPARTON - 2.22 km 2 Mins

Continue along NUMURKAH RD, SHEPPARTON - 1.01 km 1 Min

Turn right at GOULBURN VALLEY HWY, SHEPPARTON - 145 m 1 Min

Turn left at WANGANUI RD, SHEPPARTON - 3.03 km 8 Mins

Finish WANGANUI RD, SHEPPARTON - 169.67 km 2 Hrs 35 Mins

Event Schedule Info

http://www.skylinesaustralia.com/forums/in...howtopic=106582

Event Map/Licenses

http://www.skylinesaustralia.com/forums/in...howtopic=103356

Event Accomodation

http://www.skylinesaustralia.com/forums/in...howtopic=103964

Event Official Applications

http://www.skylinesaustralia.com/forums/in...howtopic=106140

Any questions/concerns/comments please post them here

Location marked where DECA is in Shepparton

post-2054-1140613136.gif

Link to comment
https://www.sau.com.au/forums/topic/106929-deca-convoy-information/
Share on other sites

The new bypass is excellent and saved us a lot of time on the return trip (didnt use it on the way up). Came back along it when coming back from Hotham 3 weeks back. There are speed cameras on it not that anyone would need to know :) Gutted I am missing this one but roll on May B)

speed cameras? Any between cooper st and the ring road? I use that section almost every week at velocities that needn't be mentioned.

I believe I saw one in that section the only time I've used the bypass so far, in the median area I believe

speed cameras? Any between cooper st and the ring road? I use that section almost every week at velocities that needn't be mentioned.

Inbound, on the bypass, theres a speed camera after every single bridge, they're very obvious though. But my being half asleep at 3am, I almost got caught

are they operational yet? the bypass hasn't been open all that long

I'm not sure...

I was going at 110 through there, after being on the hume at 110, and only saw the camera at the last minute, I braked and I haven't recieved a fine yet, so either they're not functional or I slowed down enough not to get caught...

They're infra-red ones though, because when you drive past them, at the right angle, you can see a weird beam of light. So they have to be working...

so all the new cameras on the westgate fwy etc, and towards geelong, are they point to point or just regular speed cameras?

off topic yes, but you guys were onto this topic already, and I MIGHT come up on saturday for a look, if so, ill be at the shell at 5am for the convoy.

Inbound, on the bypass, theres a speed camera after every single bridge, they're very obvious though. But my being half asleep at 3am, I almost got caught

Yep thats them, very obvious. On the poles next to the road not hanging from bridges etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's not a dumb question. I was circling this idea myself. User error is always possible!
    • Nope. The seal is in the drive. A new cable would just fill up and continue to convey oil to the speedo head. To check if this is what is happening, take the cluster out, dismantle the speedo and have a look. You probably don't even have to dismantle it. If there is oil coming up the cable, the drive into the speedo will be grossly greasy. I had to manually (and delicately) clean the gunk out of my speedo.
    • Thanks for the quick response mate, and I agree Nismo 555s, Z32 and high flow 2871 in OP6 housing (run by PowerFC) would all be "period correct" and should be a simple, reliable and reasonably quick track car.
    • It is normal for a speedo to read 0-10% high (unfortunately), intended by manufacturers and ADRs (although not in this case) to ensure your speedo does not read low if your tyres are worn. Speaking of which, what size tyres do you have on the rear, and what does they tyre placard say you should have? you can use this https://tiresize.com/calculator/ to determine what % difference that is causing Personally, when I buy tyres for a car I buy a size that will bring the speedo back to being more accurate; it if it reads 5% high I buy tyres that are 5% larger diameter. If you had an electronic speed sender like R33 onwards, the other option is to add a speedo adjuster but that won't work in R32. Finally, you  might be able to find a different sized gear for the speedo sender but that will be limited to what already exists (and I don't know what sizes do)
    • OK...so dumb question to check....do the hi beams actually come on when the push the stalk to engage them (keeping in mind your headlight switch must be at ON as well)
×
×
  • Create New...