coupe72001 Posted February 25, 2006 Share Posted February 25, 2006 I now have all the goodies that I need to attempt to convert my C210 from auto to manual (found a good box from a 240K) - except a crossmember... Does anyone know if I can use the existing one, or will I need to grab one from a manual car. Cheers Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/ Share on other sites More sharing options...
Alfadog Posted February 26, 2006 Share Posted February 26, 2006 In a C110 you can use the auto one.... C210 is PROBABLY the same. Good luck! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-1980813 Share on other sites More sharing options...
V8skylineMAN Posted February 26, 2006 Share Posted February 26, 2006 yeah, C210 is the same for both auto and manual. It's not a hard conversion, so i won't bother wishing you luck! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-1981064 Share on other sites More sharing options...
coupe72001 Posted February 26, 2006 Author Share Posted February 26, 2006 1000 thanks! Ill let you know how it goes... Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-1981279 Share on other sites More sharing options...
coupe72001 Posted March 6, 2006 Author Share Posted March 6, 2006 What a travesty! 1. Tried to mount flywheel to a washer that mounts the the automatic transmission only. 2. Clutch kit did not come with bolts to mount pressure plate to flywheel. 3. Slave cylinder did not come with mounting bolts. 4. Ran out of light and butchered the wiring trying to hook up the reverse lights. Now there are no reverse lights and instead of brake lights I get a door warning light come on instead when I hit the brakes WTF! 5. 2nd gear syncro is not in the condition that the box was advertised in... Ker-unch! Ah well... learning curve and all. Seriously if anyone does know what color wire and where to connect the reverse lights to the unit in the box I'd be much obliged. Cheers! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-1998849 Share on other sites More sharing options...
Alfadog Posted March 7, 2006 Share Posted March 7, 2006 LOL Don't worry man, we mounted the flywheel to the auto spacer thing too... was a real bitch!! Then we had to take it off. hahaha Don't you have a service manual? Check the wiring diagram and it'd be easy as. Or just play guess and check... I can scan in the wiring diagram if you need it, just ask. Sounds like you went pretty trouble-free!! On my car, the new clutch wasn't the same as the old one, so had to figure out what it was... Turns out most Nissan clutches are ALMOST the same. Went with a bit of a educated guess at 280ZX and we got it right. Plenty of other problems too - the worst bit IMO was the bloody pedals! Hope you had fun Lachlan What a travesty!1. Tried to mount flywheel to a washer that mounts the the automatic transmission only. 2. Clutch kit did not come with bolts to mount pressure plate to flywheel. 3. Slave cylinder did not come with mounting bolts. 4. Ran out of light and butchered the wiring trying to hook up the reverse lights. Now there are no reverse lights and instead of brake lights I get a door warning light come on instead when I hit the brakes WTF! 5. 2nd gear syncro is not in the condition that the box was advertised in... Ker-unch! Ah well... learning curve and all. Seriously if anyone does know what color wire and where to connect the reverse lights to the unit in the box I'd be much obliged. Cheers! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2001407 Share on other sites More sharing options...
coupe72001 Posted March 7, 2006 Author Share Posted March 7, 2006 Turns out most of my wiring confusion stemmed from a blown fuse! Ideal timing - I thought I must have mashed a wire or switch for sure... I got my hands on original factory manual at a fairly horrific cost and will trace the wiring for the reverse lights tomorrow. Other than a leak in the clutch line its nearly all done. Not sure what I will do about the nasty 2nd gear syncro in the end... do I get the box rebuilt (expensive) or search for another 2nd hand box and hope its OK (wishful thinking)? Oh yeah! The gearlever for the 240K and the C210 are similar, but not the same... It fits until you try and put the centre consol back in. Son of bitch! I'll laugh about it tomorrow. Drew Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2001536 Share on other sites More sharing options...
Alfadog Posted March 8, 2006 Share Posted March 8, 2006 What's the difference? I'd save up for some new synchros. Get 1st, 2nd and 3rd done and your box will be better than any 2nd hand box. Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2002482 Share on other sites More sharing options...
coupe72001 Posted March 8, 2006 Author Share Posted March 8, 2006 The 240K lever is bent like an L. Mount it one way and you cant get 1st, 3rd and 5th cause it makes contact with the console, mount it the other way and 2nd, 4th and reverse are out the door. I am currently driving with the console sitting on the back seat. I am assuming the C210 gear lever must be fairly straight, as the manual C210s that I have seen have an identical centre console to mine. Should I get the syncros from Nissan, or is their a better source? Interestingly mounting the pedals wasn't too bad, I kept the pedal box and hung the clutch and smaller brake pedal off the ends of the fulcrum... Very handy tip! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2002625 Share on other sites More sharing options...
Alfadog Posted March 9, 2006 Share Posted March 9, 2006 Yeah did that too.. was just a bastard for some reason. heh! Anyway, the 240K gear lever isn't like an L... it's straight! Sounds like you got a lever from something else... Z cars have a kink in them, like ... (excuse my poor ascii skillz) | / | Dunno.. I might have a spare 240K one soon though, will let you know. I dont know about all the synchros and stuff, best bet is to find a good gearbox place and ask them :| Easier said than done Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2006947 Share on other sites More sharing options...
coupe72001 Posted March 9, 2006 Author Share Posted March 9, 2006 That's just bizarre, the lever definitely is bent like you described... must have come off another car! Found a straight one at Z spares and had a dog of a time mounting it properly, really hard to push the pin through in neutral, but the pin goes in easy enough when its in 1st... baffling. Thanks for looking though. Ill let you know how I go finding syncros. Also will post a few pics of the car after it finally gets lowered on Tuesday. Drew Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2007767 Share on other sites More sharing options...
Alfadog Posted March 10, 2006 Share Posted March 10, 2006 (edited) For reference, here's a picture I took when I did mine, showing the C110 stick (straight) and the S30 stick (bent). Are you sure you've got a C210 box? Not that it really matters, just the ratios may be different. Edited March 10, 2006 by Alfadog Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2008477 Share on other sites More sharing options...
The C110 Posted March 10, 2006 Share Posted March 10, 2006 For reference, here's a picture I took when I did mine, showing the C110 stick (straight) and the S30 stick (bent). Are you sure you've got a C210 box? Not that it really matters, just the ratios may be different. Interesting, A c210 manual 5-speed is available to me, and i was wondering if the ratios in it are the same as those found the c110 5-speed? - sort of related... Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2009823 Share on other sites More sharing options...
Alfadog Posted March 10, 2006 Share Posted March 10, 2006 Yup, according to service manuals they should be the same ie FS5W71B 1st 3.321 2nd 2.077 3rd 1.308 4th 1.000 5th 0.864 REV 3.382 However, apparently C210 got 3.9 R180 whereas C110 got 3.545. So yeah, I'd like a 3.9! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2010247 Share on other sites More sharing options...
coupe72001 Posted March 14, 2006 Author Share Posted March 14, 2006 As far as I know my box is out of a 240K, and the advantages of this are 1st and 2nd are not as tall as the Z boxes, and the syncros are made of bronze, making them a hell of a lot cheaper to repair than the Z boxes... but I am not sure of the differences (if any) between the 240k and c210 boxes. Anyone? Anyone? Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2017254 Share on other sites More sharing options...
Alfadog Posted March 14, 2006 Share Posted March 14, 2006 Yup, according to service manuals they should be the same ie FS5W71B !! Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2017735 Share on other sites More sharing options...
Ravenoak Posted March 14, 2006 Share Posted March 14, 2006 Hey Alfadaog that is a very nice 240k (nee GTR) you have. Do you still run the L series motor in it or has it been punted for something else? cheers Link to comment https://www.sau.com.au/forums/topic/107301-c210-auto-to-manual/#findComment-2020497 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now