Jump to content
SAU Community

Recommended Posts

As the title says, when i am accelerating between 3000 and 4000rpm the car makes a flutter noise and my boost gauge bounces back and forward. Its giving me the shits because on the highway the car sits around 3000rpm in 5th gear when going 100km/h. It only does it when i either reach factory boost setting 7psi or hold boost steady at any psi between 0 and 7 while rpm are 3000 to 4000.

My question is why does it only do it between 3000 - 4000rpm?

Link to comment
https://www.sau.com.au/forums/topic/107414-boost-leak-between-3000-4000rpm/
Share on other sites

this has been covered a few times, it sounds like some light compressor surge

where did the hiflow come from? do a search on compressor surge / highflow and you should find some answers. with a good ecu you can tune around it as a workaround

thanks for the replies. I have checked the bov and all vac lines. It still flutters around 3000-4000rpm in every gear. Before 3000rpm it holds boost fine and after 4000rpm it holds boost fine. I think the car might need a tune, who on the southside of brisbane know their rb20's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought it was just if “the modification effected/caused the incident”
    • Ok, good to know. I have open loop I think, I forgot which ones which but I am running the o2 sensor, brand new and I got a new boost solenoid because my last one was faulty and overboosting by a lot, but it's still technically overboosting. Haven't really bothered to hunt it down as I don't send it hard regularly.
    • You should not be able to see much smoke behind you if the mixtures are good - for ~13-14 psi anyway. It's not like you need to be running hell rich for only that much boost/load. Your tune might be a tad too rich. The tuner might have done that because they like to run a lot of timing. It's impossible to know what's going on from here. It won't be the actuator. It won't be the MAP sensor. Regardless of if by "MAP sensor" you mean either the Neo ECU's boost sensor (which is literally only that, a boost sensor so that the ECU knows a) that it's achieving boost, and b) that it is not overboosting) or you mean the dash gauge's MAP sensor (because it can't have any effect at all), or you mean the boost controller's MAP sensor (because it is very unlikely that it is running in closed loop, and so it is effectively just used to know when the pressure goes positive and so you can see the boost on the display, for the most part).
    • Yeah, they'll find anything they can. "Oh aftermarket ecu, that doesn't comply with emissions" lol.
    • See, I still thought it was 10 posts, and she was at 7 so I couldn't be bothered going in and fixing it when the fix was to simply post 3 more times. 8 more times....perhaps I should have.
×
×
  • Create New...