Jump to content
SAU Community

19 Inch Lenso S7 Modify Rims & Tyres

mxtcy
 Share

Recommended Posts

mxtcy Proficient

mxtcy

Posted
Posted (edited)

Hey people,

I have a set of 19 x 8 inch (offset+35) Lenso s7 modify rims for sale. these are in fantastic condition. They have been on the car around 4 months and have travelled only 2000kms. So basically brand new. They also come with 23/35/19 tyres that have around 90% tread on them.

These rims have two sets of patterns in the 5 X 114 and 5x 100. So will bolt on to any Silvia S13, S14, S15, Skyline R32, R33, R34, Supra etc (anything 5 x 114), or any 5 stud honda such as newer preludes, intergras civics etc. Also due to the twin stud pattern 4 x 114 can also be obtained by getting 1 more hole drilled onto the back of the rim which would cost you around $50.

These pics are of the actual rims

IMG_81431.jpg

34aas3.jpg

fittingnewbar9.jpg

Lenso1.jpg

lenso2.jpg

lenso3.jpg

As you can see the rims have silver spokes with mirror polished lip and center caps. These rims retail in stores for between $3500 and $4000 depending on where you go. They are also not being made anymore and are becoming difficult to find.

I am asking $2000ono for the rims and tyres (rims in new condtion, tyres at 90% tread)

or

$1600ono for the rims without tyres (rims in new condtion)

I am located in SA

Feel free to post here or PM me if you have any questions

Sean

Edited by mxtcy
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      RB gearbox options

      By robbo_rb180 · Posted

      The r34 gearbox is like $3400/3700 landed from Japan sometime last year.   Contact jessestreeter.com for info and quotes. From memory the navara gearbox needs input shaft machined down as I looked into a while back and there's a thread somewhere here from 2018-2021 about it. Depends on what your doing with the car maybe worth the dollars to go cd009 or a 8hp50/70.
    • admS15
      George's R33 GTST build

      By admS15 · Posted

      Sounds mint👍
    • joshuaho96
      2000 BNR34 new owner

      By joshuaho96 · Posted

      VCAM doesn't really increase peak power, it just widens the powerband. So if you were giving up power with adjustable cam gears to get better low-end response yes in theory it "increases power" but otherwise not really. Stroker kit might put you in a more efficient region of the compressor map which will get you more power but at say 7000 rpm I'm not sure that much will change. The original HKS GT2530, -5s, and GTX2860R gen 2 are all roughly the same kind of turbo. If you want 600 horsepower those are the turbos you need. So 500 whp. Just expect to spend some quality time trying to figure out intake/exhaust piping. The "twin turbo" pipe is an obvious place to start. Make sure the actuator preload and all of that fun boring stuff is set up correctly. Throw a VCAM step 2 at it if you want good response, 2.8L stroker too. If you're not actually wedded to 500 whp all the time you can barely get there with -7s or Nismo R3 turbos, you just have to run E85 or race gas and run them hard:
    • joshuaho96
      RB gearbox options

      By joshuaho96 · Posted

      It's used in the GT-R, GTST/GTT, and Z32 VG30 NA + TT versions. Nissan still makes them new, they're not cheap but they're not expensive either. Personally I would just get something direct-fit and be done with it but I'm not that handy at fabrication.
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      FS5R30A the nav box isn’t it? I did think about those. Any issues? I wondered if the bell housing off an rb30 patrol would work as they are the same gearbox but with a transfer I believe. 
×
×
  • Create New...