Jump to content
SAU Community

Recommended Posts

whats your opinions people.

a turbo exhuast housing bag or a metal cover over the top?

whats the good and bad points of each?

hks turbo cover is like $180, the turbo bags im unsure.

ive been told the turbo bags make the turbo have more thermal stress and wear out quicker?

dont wanna wreck my brand new $3400 turbo anytime soon :confused:

cheers

Brad

Link to comment
https://www.sau.com.au/forums/topic/107593-turbo-bag-or-heat-shield/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I would say the turbobag would be better because it seals off the housing's heat better than a sheild can do.

Although personally I would take off the turbine housing and get it ceramically coated too, as an internal coating helps keeps the heat out of the metal in the first place. (I would also do the manifold while you're at it!!)

Edited by Busky2k

Heavily vented bonnet works best for getting rid of heat :)

If its plastic surround componants you want to save then the turbo bag is the best.

If its the turbo you want to save before but still want to help keep the heat near the turbo then the heat sheild is the way.

no worries guys, cheers for the comments.

anyone know shops who are selling the hks metal cover? or even some plain ones for a more reasonable price? or i might just make one up myself :(

i'd like some vents for the pod and turbo area but the cops wont like it at all, and the rain is an issue :) plus stagea bonnet r not easy to find second hand if i gotta get it back to stock, and i'd prefer the sleeper look.

yeah im not sure about the bag but i think the chrome cover is just for looks...but i have to say the HKS cover would look damn hotl... specialy on the T04Z

i took the cheap option and got a chrome cover from autobahn that was meant for an air filter and bolted it into place.....but then again i have the dump wraped and a vented carbon bonnet for my HKS T04S..my cover gets damn hot after a flog

cheers

francisco

ok ive been chasing prices on the metal heat sheilds and local hks distributor in WA wants $280 for one thats suits a hks T51 turbo and needs modifying, hahah good value :)

over east rang bd4s and they want $270 as well, for a pissy piece of metal and a bracket.

gcg want $220 for a plain non branded one

perfect run emailed and reckons hks japan dont even have them anymore :)

nengun is like $180 i think, just i need it within the next 2 weeks and nengun take forever.

might have to make one up until i get the hks one.

are they ally or stainless steel?

how far off the actual housing do they sit? 10mm? 20mm? or what?

cheers

Brad

i have heard rumors of heat bags trapping too much heat in and causing the turbine seal to leak prematurley. we run heat bags on some of our engines at work which range from 6ltr inline 6 single turbo to 69ltr V16 quad turbo's, but these are desiel hahaha.

from my experiance on desiels the non bagged ones last longer.

just some input, hope i dont confuse you.

cheers,

ryan

Putting a Bag on it will heat cycle it ALOT more as you're containing the heat. A heat shield would be the way to go as it let's the heat dissapate, though wouldn't decrease overall underbonnet temps as much as a bag.

Any sort of steel will do. SS would be best for looks - just don't go too thick so that it can loose the heat quickly otherwise you'll end up with heat storage in the shield..

Just get a sheet of 2mm SS, make a bracket and bend the SS to suit. $180 is crazy pricing - let alone more..

i got a turbo bag on mine and i rekon it shits on a heat shield

there was a test in hpi magazine not long ago also stating this, and u can also get a dump pipe bag which they said had great results,

the bag traps alot more heat in and i personally cant see it doing any damage, ive had mine along with alot of mates have theres for 1000's of kms and nothin wrong at all

plus with the heat shield my air con and surrounding plastics were melting

ben...

Putting a Bag on it will heat cycle it ALOT more as you're containing the heat. A heat shield would be the way to go as it let's the heat dissapate, though wouldn't decrease overall underbonnet temps as much as a bag.

I reckon the bag is better because the turbo will cool down slower than an a fully exposed one.. therefore the cooling stress on the metal is less. Although one could argue that a 'bagged' turbo will heat up faster...

Its a catch 22. In the one hand i like the bags as they are far more effeicient at insulating the emgine bay from the heat.

But, my main concern with this is it traps the heat around the cartridge. Even if the thing is water cooled i dont like the idea of holding all that heat around the cartridge.

So i thin the best solution is a stainless shield over the exhaust housing (combined with HPC coating the exhaust housing). Racepace in melbourne have about the best type i have seen as the cover actaully saddles the cartridge and acts as a kind of partition...its the way to go

u can raise the back of the bonnet up a bit if u want.

take off bonnet and put some washers on em to act like spacers and raise is 5-10mm doesnt look too different and dramatically realeses heat from the RB26 lol. i would put a shield around ur ABS actuators and a turbo bag. and shield ur exhast.

rain wont really do anything to ur turbo or exhast.. when engines r washed down they spray water straight onto everything.. a little bit of rain will do nothing.

my old GTiR has vents stock as well as that sexy bonnet scoop. and rain got in.. did nothing.

u can raise the back of the bonnet up a bit if u want.

take off bonnet and put some washers on em to act like spacers and raise is 5-10mm doesnt look too different and dramatically realeses heat from the RB26 lol. i would put a shield around ur ABS actuators and a turbo bag. and shield ur exhast.

rain wont really do anything to ur turbo or exhast.. when engines r washed down they spray water straight onto everything.. a little bit of rain will do nothing.

my old GTiR has vents stock as well as that sexy bonnet scoop. and rain got in.. did nothing.

the bonnet idea is a good one, though my mate did it to his mz20 soarer and every car that he pulls up next to at lights tell him he has left his bonnet up haha.

the water on turbo is more of an issue if its boiling hot after a big thrash and then suddenly water hits it it changes temperature soo quick (immediately almost) that it shrinks and ive heard problems of cracking the housings though i dont know how true that is :confused:

the heat bag issue as roy has said is exactly what my point was about the bags being too efficient and not letting the air circulate at all. i'd imagine the turbo getting more than twice as hot as one without a bag on it.

whats these racepace ones worth? might give em a call tommorow, does anyone have a contact number and dont forget the state phone number first as im unsure which state they are in.

cheers

Brad

Edited by CruiseLiner

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've run most of the semis which are available and sadly you can pretty much rank them by price.  Fast and spendy = Z221, A050, DZ03G Ok and mid range price = R888, V70A, A052 I don't really rate the AR-1 because it's not cheap enough for the performance level offered. Yes, they're much cheaper than A050 but V70A can be had just as cheap and is a much faster and more predictable tyre.
    • There's no current law that stipulates that you cannot eat dessert with a soup spoon, although, it is socially unacceptable of course, shame on you But, there are emissions laws, which is sort of on topic to the OP's questions Things like emissions are, if anything, going to get stricter in the future for road registered cars I believe, 'Merica has yearly emisions testing in some states, the UK has it's yearly MOT testing as well which includes emissions Building, and purchasing modified vehicles may become alot more problematic if you want to keep them registered, how, if, and when each state handles this is anyone's guess  More food for thought really
    • I'm on the AD09, strictly on the street. They are a very nice tyre, have done ~16k km and are near the end, might make it to 20. They are, in my opinion, very much just a street tyre. I wouldn't expect them to be equivalent to some of the others in your list on the track. Although I'd be pleasantly willing to be surprised. My memory of the AD08Rs is vague enough, due to the passage of time, that I shouldn't try to compare them, but I feel as if the AD09 is not quite as "sporty" as the AD08R was.
    • There's a difference between "selling" a product to someone (which, if you walked into a workshop or bricks and mortar store and bought and walked out with it, is just the act of buying and selling) and rolling your buggy into a workshop and having them fit non-roadworthy stuff to the car. And for the latter, let's ignore any potential legal loophole arguments that the armchair lawyer might want to make to differentiate between supplying your own parts to be fit by the workshop or getting the shop to supply and fit. The workshops that have been dealt with in the US for this are in the latter category. It would be near impossible to try to charge/attack/criminalise a shop for selling "for off road use only" parts to someone unless those things were intrinsically illegal in their own right, or had other legislation wrapped around them, such as there is for guns, pharmaceuticals, etc. Well, no. And you knew your argument was silly when you made it. And there is. it might be somewhat harder in Vic, but then that's the price you pay for electing the long list of (unts that you have to run the whole shit hole**. But otherwise, you can put an aftermarket or otherwise tunable ECU into a car and get it run through the whole shebang of emissions testing as part of an engineering cert and, so long as the tune is "locked" afterwards, then that modification is on the list that is approved on the cert. But....it is an expensive process. ** Of course, the (unts who make up a large proportion of the population that eternally try to get around the rules are also a part of the problem and the reason that you end up with draconian rules in the first place. By contrast, SA was founded and the government and civil service set up and run by very sensible types (largely German) who set up good structures that enabled a lighter touch of government on the somewhat better behaved population. it is only more recently that we have followed the rest of Australia down the criminal drainhole of penal colony behaviour and now we have to catch up with mobile phone cameras and so on.  
    • Not specifically the revamp Toyos. In the past I've used Nitto NT01s, which were essentially the same compound as R888 with a different pattern (that's what the internetz said, so just be facts). I did like the NT01, progressive fade, didn't go from grip to 0 grip in a split second. If you look at the serious street/track guys, most are either on Cup 2, A052, A050, AD09, CR-S or AR-1.  
×
×
  • Create New...