Jump to content
SAU Community

Recommended Posts

R33 Factory Wheels (16") ....You guys know what car's they'll fit and what they wont..good for a back up set, or go halvies with a mate and have some burnout wheels...They have tyres on them, but they are not roadworthy.....i ripped them up before i got my rims..hehehe..

Like the wheels below

$265 Or Nearest Offer

2.jpg

Link to comment
https://www.sau.com.au/forums/topic/1076-r33-factory-wheels/
Share on other sites

Put me down for two of them, if anyone else will go halvies and take the other two that is? Remember a 16" tyre will flex more than a 17" and offer better traction at the drag strip, with a good tyre of course.

Link to comment
https://www.sau.com.au/forums/topic/1076-r33-factory-wheels/#findComment-23695
Share on other sites

Hehehe for $265 each rim you could nearly get a set of 18's witho ut tyres! heheh..

Nah man, its for the set....If you want em, take em...let me know via here or phone 0421 34 1981...Centre Caps included (they are damn hard to get these days!)

Regards

Sam

Link to comment
https://www.sau.com.au/forums/topic/1076-r33-factory-wheels/#findComment-23799
Share on other sites

I'm assuming the reason you go halves is just to run them on the rears with large profile tyres for dragging ? I was after them for a set for when I get defected, but I'd be happy to go halves, I will have to wait until next Friday though to deposit the $$$ due to pay week, but once again I'm more than happy to go ahead, just have to wait a week ...

Link to comment
https://www.sau.com.au/forums/topic/1076-r33-factory-wheels/#findComment-23923
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 馃槀 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
  • Create New...