Jump to content
SAU Community

Recommended Posts

Hi Guys,

I've posted a few threads over the past months asking i guess annoying questions. Well, here is another. Where do you guys mount/locate/whatever turbo timers, gauges, electronic displays etc?

Basically, i really like the look of the HKS type 1 turbo timer. I want it. And i want to be able to see it when im driving. But i am very worried about a copper or RTA defecting me for it and then having to go blue slip and basically being royally f**ked. I see pics of you guys with things on the dash, pillar etc and i know its illegal. Basically i dont want to get caught for obvious stuff. What are my options?

I was thinking, and this is just a thought, that perhaps i could remove the double din audio system, replace it with a single din HU and in the din below it, put the turbo timer there somehow... with some sort of face plate covering it for when i need it to be not seen. Is that doable?

My only other option i can think of to keep a low profile is get one of those small apexi ones and have it under the dash/steering column.. but i like the HKS.

i put mine on the spacer between the steering wheel i have it set on speedo because mine is out by 10k but ive never had any problems id just tell them its a information unit like a RSM, and also it flicks over (to timer mode) when you switch the keys off. the HKS ones are good i wanted one of those the TYPE 1 but there pretty enpensive so i have got the greddy fully auto timer, practicly the same but the HKS takes out the speed limiter the reason i liked it but when i get my power fc that will do it for me!!

cheers simon

My Profec is on the steering wheel column and my SAFC is right in the middle of my dash facing toward me (above the middle aircon vents).

No way is it stealthy but it looks nice :)

Want to be able to see it because it does more than just act as a turbo timer.

Thats an idea on the steering wheel column and tell them its an information display for speedo... that legal? Good idea!! I might just do that.

Whats this about the HKS disabling the speed limiter??

i have my turbo timer under my steering wheel column and my boost controller on top. it looks cool as it both lights up red

coppers pulled me ova and didnt say anything cause i set my turbo timer to read batt vaults and boost controller set on something else

Yeah that sounds like a good idea. Just make sure i learn the quick key combo to disable turbo timer function so car turns off straight away if i get pulled over.

Edit:

Actually can you guys show me a photo of yours setup? Want to get exact ideas in my head so i can get a good idea before my car arrives!! :P

Edited by Xizor

Ive got the same setup as r32_Gts4.

Just under ther steering colum, to the right side where the dash goes down and meets the tunnel for the gearbox.

A turbo timer is only illegal if you leave the car running and walk away from it whilst engine is running. I had a cop hassle me about it ages ago and i told him its used for when i take my car to the track, once i have done a few laps and come back to the pits i can let the car cool down.

I cant remember the exact law or phrase for lusing a turbo timer in public but you could try the RTA website or even go to your local police station and enquire!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • With stone chips, you really can't just try to fill them. You really have to sand that spot to lower the edges of the chip, so that the filler will end up covering a wider patch than just the chip. Otherwise, you're trying to have a sharp edged paint surface match up to some filler, and they just do not sand the same and you always end up with a noticable transition. A bunch of adjacent chips should be well sanded back, to round off all those edges, and use a lot (in a relative sense) of filler to raise the whole area back.
    • To expand on this to help understanding... The bigger/longer the block is, the more it's going to work to sit on your far away high areas, and not touch the low stuff in the middle. When you throw the guide coat, and give it a quick go with a big block, guide coat will disappear in the high spots. If those high spots are in the correct position where the panel should be, stop sanding, and fill the low spots. However, using a small block, you "fall off" one of the high spots, and now your sanding the "side of the hill". Your little block would have been great for the stone chips, where you only use a very small amount of filler, so you're sanding and area let's say the size of a 5/10cent piece, with something that is 75*150. For the big panel, go bigger!   And now I'll go back to my "body work sucks, it takes too much patience, and I don't have it" PS, I thought your picture with coloured circles was an ultra sound... That's after my brain thought you were trying to make a dick and balls drawing...
    • Oh I probably didn't speak enough about the small sanding block for blocking large areas.  In the video about 3 minutes in, he talks about creating valleys in the panel. This is the issue with using a small sanding block for a large area, it's way too easy to create the valleys he is talking about. With a large block its much easier to create a nice flat surface.  Hard to explain but in practice you'll notice the difference straight away using the large block. 
    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
×
×
  • Create New...