Jump to content
SAU Community

Recommended Posts

post-8728-1141370382.jpgpost-8728-1141370407.jpgpost-8728-1141370422.jpgpost-8728-1141370447.jpgpost-8728-1141370462.jpgpost-16877-1125065261.jpgpost-8728-1141370493.jpg

I have other genuine nissan parts:

- timing belt (done 10000km) $20

- oil cap $10

- intercooler plumbing pipe (lower pipe next to batt) $20

- standard full exhaust with dump pipes (excellent condition done 50,000km on my aust gtr) $100

- catch can blow-by pipe SOLD!

- oil pick up pipe

- pcm valve SOLD!

- factory radio SOLD!

- gtr seat covers $20 SOLD!

for whatever these parts are worth to anyone out there with a gtr :D

Regards,

Marko

0404 884 876

(Sydney based)

post-8728-1141370478.jpg

Edited by Marko R1
Link to comment
https://www.sau.com.au/forums/topic/108100-other-assosrted-bits-for-gtr/
Share on other sites

yep its from an r32 but id say the same pipe would also suit the r33 knowing that they have the same running gear...if ur in sydney try it out & if it fits u can take it

I'm assuming they are from an R32 GTR? The I/C pipe looks different to '33 and I need one. ;)
  • 2 weeks later...

- intercooler plumbing pipe (lower pipe next to batt) $20...NOW $10

- standard full exhaust with dump pipes (excellent condition done 50,000km on my aust gtr) $100...NOW $50

I also have the standard ecu advertised (no speed limiter)...NOW $50

i still have 2 timing belts & oil cap

if the above parts are not picked up they are going in the bin, i really don't care about these leftover parts from my sold gtr!

(i'll give it a week or so)

Edited by Marko R1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh man what a deal.... Funny enough (well not really) I sold a car to some old dude (buying for his Daughter) on a Saturday, He asked if she could take the car now and pay me the money on Monday as the bank wasn't open. Needless to say I told them to come back with the cash or get f**ked! Luckily the money seemed to magically appear in his pocket a few minutes later, so it all ended well (for me).
    • Gucci bags tend to hold their value well, so someone’s definitely going to get a nice find here.
    • @Ozdavroz Not going to get a better deal than that. Cash up front and ongoing payments. 🤑
    • I wouldn't even move it like gTSBoy is saying. I'd seriously do what Duncan is saying. Unplug the injectors, and unplug the fuel pump.  Pull the spark plugs out. Have a look in quickly with a bore scope if you want. At most, you can't spray a bit of oil into the bores so there is lubricant in there while you crank it. (Don't fill it, as it's only going to enter the exhaust, or spit at you out the spark plugs holes. Before cranking the engine on the starter, after a 5 year sit I'd probably prime the oil system manually. Easiest way to do so is to look at buying an oil filter relocation block, fit it to the engine. The pressure line going into the engine on this block you can then shove into some sort of oil pump, or put it into a bottle, with that hose going to the bottom. Fill bottle up with oil. Now seal the bottle and add a compressed air line to the top of the bottle. Feed compressed air in, about 20psi will be PLENTY. This will pump oil through the motor. Be aware, it also means it will drain back to the sump, so make sure you don't end up over filling the motor Now bolt the old oil setup back on (or fully install the remote filter system).   This way you've at least pushed fresh oil everywhere, then you're letting the motor crank to then do its own oiling. Then I'd tap the key to make sure it can start to crank, if the motor free bumps, then I'd just hit the key and let it crank. After letting it crank and seeing you can get real engine oil pressure, put new spark plugs in, reconnect the fuel system electrics, and send it.   Additionally, you can look to remove the fuel feed line to the rail, and divert it to a tank so you can get the bottom of the tank shit out, and just incase there's some crud sitting anywhere that gets passed the fuel filter (or is already ahead of it).   If fuel injection at the injectors ends up appearing to be a problem, you can dump the injectors into an ultrasonic cleaner for a quick flush clean out. Note this isn't as good as new injectors, or getting them pro cleaned and flowed    
    • All I can say is, that's still bloody awesome! No plans on caging it I'm guessing?
×
×
  • Create New...