Jump to content
SAU Community

Recommended Posts

Nismo gt 2 way lsd part # 38420-RS020-BA

will fit all 34`s and stagea 8/98 onwards ..S2

used in street car on stock boost for approx 9000klm`s

$1000 or $800 exchange for std LSD

pick up in brisbane or freight no problem

0412-002798

do you know what the ratio is of this diff??

does it have the ABS sensor??

interested in trade for S15 factory helical/torsen LSD??

original crown wheel and pinion are used ...so there is no change to ratio

yes it has abs sensor

if s15 is the same as gt-t 34 then trade is fine

S15 has 3.69 ratio and the 3x2 bolt halfshaft pattern

kind workout what r34 gt-t is yet but suspect 4.08 and probably 5 bolt halfshafts??

in which case would need to swap drive shafts too to suit the halfshaft pattern and don't know if you'd want the 3.69 ratio?

Nismo gt 2 way lsd part # 38420-RS020-BA

will fit all 34`s and stagea 8/98 onwards ..S2

used in street car on stock boost for approx 9000klm`s

$1000 or $800 exchange for std LSD

pick up in brisbane or freight no problem

0412-002798

still available :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is rebuilding it even a thing? Where would the shop find parts for it? I looked at some off these local online stores for my r34 and suprisingly they had brand new aftetmarket ones for $600-800 I think. I guess r32 might be a bit tougher.
    • I remember the days when E85 was priced in according to the $ per km outcome. Sure E85 was about 35% cheaper, but you also lost about 35% range... now it's fked..
    • They do. The pale yellow translucent ones from Japan were .... I dunno. Useless? Whiteline and SuperPro are probably fairly similar. There's bound to be a range of different hardnesses amongst the dozens of options on the market. The simple fact is that the pineapples don't get up inside the bush at all. They just sort of exist in the space between the washer/bracket and the subframe's bush outer tube, and...exert a bit of force between them? Or something like that. I'm sure that with enough provocation, they will simply allow one to move wrt the other.
    • I'm not sure they came in different hardnesses? Going from memory only - I had set them up in the balanced setup. I also have poly bushes, so I have both poly bushes and pineapples. This is what my memory tells me at least. I'll have to take a look under there to be sure. The tramp was so bad that I managed to eject/kill a diff bushing, so those I know are stock. The tramp is bad enough that you are 200% sure you are doing severe damage to the car. It's not just chirping or vibration, it feels like you're hitting a speed hump/kerb 10 times a second. The issue has persisted between subframes! (I went from Hicas to non hicas subframe and replaced every bush a few years ago now) so I'm entirely lost. Every arm is factory.
    • Can recommend the Frenchys kit, been using it 2 years now with no issue, very happy with it.  Only thing for me was upgrading the thermo fan but I am super fussy on cooling.   Also interested in electric AC, partly for boot mount to have a clean bay and partly would love the idea of cooling off the car before i get in. The battery setup to do that might be tricky / expensive though.  Found this an interesting watch.    
×
×
  • Create New...