Jump to content
SAU Community

Recommended Posts

Well they say the proof is in the pudding.

I had a lazy syncro in my R32 GTR. On the down shift from 5th to 4th the only way I could engage with out a gear crash was to double clutch and spike the revs to 4000. Anything less than that and "CRUNCH".

The change from 3rd to 4th was fine as long as the change was not rushed.

Choice - Medication or surgery?

Spoke to Stu who pointed me onto the "Redline" product range. Thanks Stu youve saved me a bucket of work and not to mention money.

4 Ltrs of Redline "Lightweight Shockproof" gear oil later and I now have silky smooth box. No kidding this stuff really works. I can't crash the gears if I try now. 3rd to 4th I can jam it through and not a sign of gear clash.

Id recommend this product to anyone having similar problems which I understand is a common issue with import R32's.

If you are interested in the science behind how it works it quite simple really. Most oils contain friction modifyers. Thats great for the teath of the gears and the roll shafts but does not help a wearing syncro at all. Syncros by nature use friction to work. In a nut shell, if the oil is too slippery the syncros struggle to do their job (Im talking worn parts here). Redline has reduced the friction modifyer content but replaced that with synthetics to improve gear wearing characteristics.

Woww great stuff.

Cheers

Edited by Bov
Link to comment
https://www.sau.com.au/forums/topic/108186-redline-experience/
Share on other sites

Well they say the proof is in the pudding.

I had a lazy syncro in my R32 GTR. On the down shift from 5th to 4th the only way I could engage with out a gear crash was to double clutch and spike the revs to 4000. Anything less than that and "CRUNCH".

The change from 3rd to 4th was fine as long as the change was not rushed.

Choice - Medication or surgery?

Spoke to Stu who pointed me onto the "Redline" product range. Thanks Stu youve saved me a bucket of work and not to mention money.

4 Ltrs of Redline "Lightweight Shockproof" gear oil later and I now have silky smooth box. No kidding this stuff really works. I can crash the gears if I try now. 3rd to 4th I can jam it through and not a sign of gear clash.

Id recommend this product to anyone having similar problems which I understand is a common issue with import R32's.

If you are interested in the science behind how it works it quite simple really. Most oils contain friction modifyers. Thats great for the teath of the gears and the roll shafts but does not help a wearing syncro at all. Syncros by nature use friction to work. In a nut shell, if the oil is too slippery the syncros struggle to do their job (Im talking worn parts here). Redline has reduced the friction modifyer content but replaced that with synthetics to improve gear wearing characteristics.

Woww great stuff.

Cheers

Yeah, top stuff! It kept my stock box together for as long as it did. I use it in my dog box, drives like a stocker (well kinda hahaha).

I use a 50/50 mix of lightweight and heavyweight shockproof oil. The 9 sec supra guys in the US use a 50/50 mix in there stock 6 speed getrags.

I spoke to the Aus redline tech support, they said it was fine to mix. Worth while for any box, in a car running more power from stock.

Well worth the money... much cheaper than a new box or a re-build.

EDIT:

I actually had a chance to have a chatt with one of the owners/ sales rep of redline at Bursons on argyle st. He was very informative and loved to chatt about cars and the product. They claim 30% extended component life with thy're engine oil product, as well as some big claims about they're G-Box oil's, diff oils's and water treatment. They have a performance product for allmost any application on or around your car. If you wan't any more info, go see Tony at Bursons in argyle st.

I recon I'll be switching from Motul Crono to they're performance oils, I allready use they're water treatment ( knocked 12 degrees off consistantly at the end of every run and if you have water temp/ign correction table set up right you can pick up a little more hp when it's hot, e.g. dragracing.) and the 50/50 mix of g-box oil in my dogbox.

Anything that is used and proven with V8 supercars can't be a bad thing.

Edited by XRATED
  • 3 years later...

hey sorry to drag up an old thread. But is this redline stuff like a addtive or a full replacment oil. so i just buy a 4L bottle of it dump my oil in my box now and refill it with this?? also dose it come in all diffrent weights? or just the one weight?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...