Jump to content
SAU Community

Recommended Posts

Hi all

Which is better:

Blitz Dual SBC Spec S

- 4 boost settings

- single solenoid (rated at 18psi)

- approx 360

Greddy Profec B Spec II

- 2 boost settings (rated at 30+ psi)

- twin solenoid

- approx 400 as well

I wont be boosting more than 12psi, but want something that will hold boost well (no spiking), thats why I am contemplating the greddy even though my boost level is not high.

Anyone used either and whats your experience?

Another one thats also good the greddy profec spec s, I like the turn knob feature that allows you to adjust your low and hi level boost easily. I dont think its as easy with the ones above, or is it?

Thanks all

Edited by nuffsaid

i reckon get the greddy because of the 2 solinoids(spelling) you'll end up wanting more boost than the blitz one offers my mate bought the blitz thinking he wouldnt go over 1.3bar and now wants to raise it 1.6bar

HYBRID ELECTRONIC BOOST CONTROLLER for under $400 - holds boost extremely well.

Here is some further info:

"Hybrid Electronic boost controllers not only spool the turbo up quicker, but also regulates the amount of boost pressure. Features included:- Microprocessor controlled. Closed/Open loop design. Accurate boost regulation. Fast boost attenuation. Two boost settings. Compact Design. Full in car adjustment. Competitve price. 9Bar/130 PSI solenoid. Easy to install with 2 built in pre-sets, easily adjusted by two knobs in the cabin"

I use one and its absolutely fine.... a good choice.

Tangles

The GReddy EBC only has one solenoid.

Are you sure? I thought he B Specs are dual solenoid. A couple of tuners have told me that they are, some links below also seem to think so.

See: http://www.sportcompactcarweb.com/tech/020...boostcontrol05/ and http://www.modernperformance.com/all/greddy_profec.shtml

Are you sure? I thought he B Specs are dual solenoid. A couple of tuners have told me that they are, some links below also seem to think so.

See: http://www.sportcompactcarweb.com/tech/020...boostcontrol05/ and http://www.modernperformance.com/all/greddy_profec.shtml

Arg I'm not sure now - the trader I bought mine off (chiba_osaka_boy) said it was single solenoid and if you look at the size of the Blitz Dual SBC (definitely twin solenoid) solenoid box its quite alot bigger than the GReddy solenoid unit.

BoostSpecRS.jpg

Go the eboost 2

get it installed and i will tell you how to use it

you realy need a boost gauge so eboost have 1 is not that much more

and dont do a dyno and i will tell you how to set it

they are so easy to use its not funny

james

It will depend on who fits it aswell

now i can use mine i would say any 1 who knows how to use wat ever 1 you got would be good

tuning is so important

1 tuner over in perth recons that the blitz 1 is the best cause they hold boost the best and are easy to fit

but that was the only 1 they could tune properly i was later told

james

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...