Jump to content
SAU Community

bl#$dy EPA notice!!


Sideways
 Share

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by INASNT

who did u ring? the epa??

did u ask them if u can get the certificate and fax it to them?

Yep - rang the EPA - from the phone number on the letter...

They said that I have to bring the car to Macleod for _them_ to test/check... cannot go to exhaust place (as all they can test for is noise level)...

Link to comment
Share on other sites

Originally posted by pushead

down to Macleod?? isn't that far? when I had my EPA test there is some place down in dandenong who can do it for you..forgot the name though but darn, you don't have to take it all the way down there.

yep fark mcloud, ring them back and tell them u aint going all the way down there when there is 1 in morabbin.

Link to comment
Share on other sites

Just rang them again - and I _have_ to go to Macleod.

All the other testing stations can only test for noise

they want to test for emissions, and all other EPA related items

and they can ONLY do that at Macleod.....

I'ts because the car has been reported 3 times already (Once before I bought it and twice while I have had it) so they want to check out everything this time....

bugger...

Everything is std execept for the Exhaust, Pod filters and it's got a Unichip piggybacked to the Stock ECU (piggybacked haha that's a joke more like strangling it :D) I want to get rid of the unichip anyway as it's a piece of you know what... the pods I believe are ok anyway... I have only got Std GTR plumb back bov's... oh it's got an HKS EBC but it's not connected anyway as I am only running std turbos at 14psi... but will remove the EBC out of the cabin just to be sure....

So as long as I quieten her down a bit with a muffler without a siliencer, remove the usless unichip and unused EBC then it should all pass without any problems....

Link to comment
Share on other sites

thats total bullshit going to mcloud! its like 2 hrs away u know!

if i dont get a reply this week from them i am gonna call them and tell them how much bullshit this is, considering my exhaust system is only 6 months old, i just passed 2 tests already in the same week as the notice was given, and is a 96 model car, when there 100's of older shitboxes on the road puting out smoke and pollution.

Link to comment
Share on other sites

Sideways, in your last post you mentioned that you have pod filters on your car... i think you will have real problems getting these passed as they are a grey area within the law... i.e no one is sure whether oiled / not oiled is legal.

But then, with the EPA i've heard (unsubstantiated) that you are allowed one modification to the intake...

I'd suggest finding a stocker air box for the test, unless your pods are partitioned and not visible.

Link to comment
Share on other sites

Just off the phone from EPA again...

You can have 1 mod to your intake system...

Pod filters are legal as long as they are NOT foam type...

You can have them (paper type) as long as the rest of your intake is std...

On the same note (but not relevant to me in this case) You can relocate or fit a bigger intercooler as long as you don't have pod filters (only 1 mod allowed)

So for you GTST owners out there, you can front mount your intercooler as long as you don't have pod filters... bummer ay

Link to comment
Share on other sites

Originally posted by ice180

shite i've got a pod, front mount cooler, bov, external wastegate and screamer pipe.  hmmmmmmm

i think i am gonna have to report u to the epa now richie :)

Link to comment
Share on other sites

yes yes and yes myabe safc u can hide but not the other two. Friend got done for the first two in chaps along with pod, exhaust, injectors... had to convert back to std pretty much. some of the inspectors know what they are looking for.. argue boost controller makes car run rich thus inc emissions etc .

hope u get a new trainee or slack dude not an expert otherwise its back to ice.

Link to comment
Share on other sites

well the seperator can be taken off and boost controller hidden for the inspection, and s-afc in the glovebox!

how can the inspector get u for injectors??

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • That is typical (for a rb at least) with a medium to large turbo, noting the format of the graph is probably misleading what you see a little (half portrait width but full height, in landscape it would look quite different) Basically until it hits target boost the torque curve is rising steeply, when that is 4000+ rpm it is not great to drive since almost all of your life is between 1,000 and 3,000 rpm. Once you hit target boost the wastegate opens and torque stops rising so quickly. From there the shape of the curve depends mostly on the cams and where they have a peak vs the rev limiter
    • Last of the maintenance items for now....not sure why but the drivers side window switch had heaps of wear on the right front and right rear switches Unfortunately, unlike earlier Skylines the controls are bolted to the door trim from the inside. So....off the with door trim. There are bolts or screws: Behind the door handle cover, pop it off from the handle side Under the rubber trim at the bottom of the door pull (also just pops up) Behind the courtesy light at the bottom. Other than that, just window down then pop off the usual selection of push in clips around the perimeter and the trim lifts up Interesting that they have a bolt on cover instead of the old school plastic held on by goop....I guess they prioritised sound levels over price Then, 2 screws and 2 plugs to replace the switch (looks identical to the Fuga/Q70 one incidentally) and put it all back together. Also much better
    • ok I understand, but the majority of turbo vehicles lose torque, or have a flat torque curve after the spool.  hence my initial misunderstanding. I didn't think this type of curve was possible  
    • It is completely normal. Your original understanding is what was wrong, not what you see in the charts.
    • made with turbo and tuned by (hypergear)
×
×
  • Create New...