Jump to content
SAU Community

Recommended Posts

I took my series 2 r33 gts-t coupe in for a blue slip today as I'm changing the rego from ACT to NSW.

The mechanic points out to me the compliance plate which clearly states a seating capacity of 5.

any body can see that they're a 4 seat car

He'd already rang (insert proper authority here) and they gave him no real answer.

unsure of what to do he told me to fit a centre seat belt in the back for it to pass.

Am I going to be the only 5 seat r33 in NSW ? or has someone else been through the same thing?

My R32 GTS is complied as a 5 seater but only has 4 seats.. whats the deal there? are all two door R32s four seaters? i bought it a couple of weeks ago and the rego had run out, i just got new rego no probs

End of Story: r32s-34s came from nissan as 5 seaters. I.e. they all had a lap seat belt. There is no such thing as whether the compliance place bothered to 'install' a centre belt, because they already had one.

There is no reason for them removing it either. Strange things happen, maybe it was cheaper for them to obtain their compliancing for that model of car by removing the centre seatbelt.

Just check that the centre belt hasn't fallen into the hole. If it has, i'm sure you'll be able to find one off a wreck for like $20-50$. There will already be reinforced holes for the buckle and belt under the seat.

End of Story: r32s-34s came from nissan as 5 seaters. I.e. they all had a lap seat belt. There is no such thing as whether the compliance place bothered to 'install' a centre belt, because they already had one.

There is no reason for them removing it either. Strange things happen, maybe it was cheaper for them to obtain their compliancing for that model of car by removing the centre seatbelt.

Just check that the centre belt hasn't fallen into the hole. If it has, i'm sure you'll be able to find one off a wreck for like $20-50$. There will already be reinforced holes for the buckle and belt under the seat.

All seat belts get replaced to australian approved ones and I'd say when it went through compliance the

work shop was to lazy/cheap to put the centre belt in

End of Story: r32s-34s came from nissan as 5 seaters. I.e. they all had a lap seat belt. There is no such thing as whether the compliance place bothered to 'install' a centre belt, because they already had one.

There is no reason for them removing it either. Strange things happen, maybe it was cheaper for them to obtain their compliancing for that model of car by removing the centre seatbelt.

Just check that the centre belt hasn't fallen into the hole. If it has, i'm sure you'll be able to find one off a wreck for like $20-50$. There will already be reinforced holes for the buckle and belt under the seat.

As Hootchy said, they have to be removed when complied...so yeah I'll stick to my previous comment of lazy compliance companies that don't do their job and replace them...I know for a fact my current R34 was complied to the letter, my last one was questionable.

well, not only is my R32 GTR registered as a 5 seater (and please dont tell me my car came from nissan as a 5 seater) but on my rego sticker my car is registered as a "nissan sedan". My car could be a maxima for all transport SA knows.

Note: i did all the regency paperwork and took the car through myself after compliance and did not mis-represent the car in any way

well, not only is my R32 GTR registered as a 5 seater (and please dont tell me my car came from nissan as a 5 seater) but on my rego sticker my car is registered as a "nissan sedan". My car could be a maxima for all transport SA knows.

Note: i did all the regency paperwork and took the car through myself after compliance and did not mis-represent the car in any way

yes lang, believe it or not, ugly poo gtrs are 5 seaters from nissan. Although it doesn't look like you can sit on the hump, it is a seat.

How do I know? when we brought in a couple of them (reads - my dad has 1, bro has one) they both had middle lap belts from japan.

Your copmlier obviously removed them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
×
×
  • Create New...