Jump to content
SAU Community

R32 - Dodgy Or Legit?

julion
 Share

Recommended Posts

julion Community Regular

julion

Posted
Posted

Heya.. Im new to skylines and was looking at buying an R32 GTS RB25DE.. (I know im a pussy for not getting a turbo but NSW new P plate laws wont allow me to drive one :P

I had a look at a black RB25DE of these cars, which had 95k kms on the odo.. imported in 2002. There were a couple of things that didnt seem quite right though. There was a hole just to the left of the steering wheel which had obviously been drilled, it was about 8mm in diameter about the size of my pinky. Also the vin/chassis number is indented on the little plate thing which is bolted on the car.. Correct me if im wrong but i read somewhere that this number should not be indented and if you run your finger over it, it should be smooth. I ran my finger and u could tell it was indented.. I took it for a test drive and everything seems to be ok any comments anyone?? thanks

Link to comment
https://www.sau.com.au/forums/topic/108775-r32-dodgy-or-legit/
Share on other sites
r0ma Community Regular

r0ma

Posted
Posted

Was the hole the dimmer switch?

I know that skylines dont have these stock and there put in for compliance (someone correct me if im wrong, But all Skylines ive seen have them after compliance).

Maybe it has fallen out? Been removed..etc?

Also, are you talking about the compliance plate? Where was it located and what color was it?

julion Community Regular

julion

Posted
  • Author
Posted
Was the hole the dimmer switch?

I know that skylines dont have these stock and there put in for compliance (someone correct me if im wrong, But all Skylines ive seen have them after compliance).

Maybe it has fallen out? Been removed..etc?

Also, are you talking about the compliance plate? Where was it located and what color was it?

Its not the compliance plate, its just a plate which is on the drivers side of the car, on the wheelmound (I think) its about 12 digits/numbers long and says nothing else.. theres nothing in the hole its just a hole in the panel.. what do you mean by the dimmer switch? I dont know what that is soz...... Thanks heaps for your help

r0ma Community Regular

r0ma

Posted
Posted
Its not the compliance plate, its just a plate which is on the drivers side of the car, on the wheelmound (I think) its about 12 digits/numbers long and says nothing else.. theres nothing in the hole its just a hole in the panel.. what do you mean by the dimmer switch? I dont know what that is soz...... Thanks heaps for your help

Sorry i cant really help you with the Plate. Maybe take a pic? Call revs and have the cars history checked.

The Dimmer Switch is the button/turn knob that makes the dash lights bright/dim (your speed light control). In skylines they are not a OEM item and are put in for australian complaince, Due to regulations. (Like i said, Correct me if im wrong, But all skylines i have seen in Aus had these dimmer switches installed for complaince).

They are usally drilled into the dash somewhere, I have had 2 skylines, 1 was under the steering wheel, And the other was to the left of the steering wheel.

Cheers.

julion Community Regular

julion

Posted
  • Author
Posted
Sorry i cant really help you with the Plate. Maybe take a pic? Call revs and have the cars history checked.

The Dimmer Switch is the button/turn knob that makes the dash lights bright/dim (your speed light control). In skylines they are not a OEM item and are put in for australian complaince, Due to regulations. (Like i said, Correct me if im wrong, But all skylines i have seen in Aus had these dimmer switches installed for complaince).

They are usally drilled into the dash somewhere, I have had 2 skylines, 1 was under the steering wheel, And the other was to the left of the steering wheel.

Cheers.

hmm that could be it.. theres no dimmer switch in the car at all so that probably is it, although it seems like a bit of an awkward position for a dimmer switch. I thought that maybe they had wound back the ks or something. ill take some photos when its light 2moz and put em up.. thanks for all your help

Jade Community Regular

Jade

Posted
Posted
Its the silver panel on the left of the photo which is infortunately caught in the glare.. thanks

Hi,

This is the 17 digit Vehicle Identification Number allocated to the vehicle in Australia and is quite normal. This number can either be stamped into the chassis or engraved onto a plate that is then rivetted onto the chassis. In Australia this 17 digit number becomes the vehicle identification number for registration in Australia and replaces the original chassis number from the manufacturer.

The plate that you need to be careful of is the original manufacturers plate fitted to the engine firewall. These are the plates that should be embossed not engraved. These plates have Nissan Motor Corp and information including chassis number - model number - paint code etc.

Cheers

Jo

r0ma Community Regular

r0ma

Posted
Posted

Hey champ, After seeing the photo, Thats pretty much where the one in my R33 was.

Its also weird that you dont have a dimmer switch as ive said previously I think there needed for compliance.

Maybe remove one of the bottom pannels and see if you can see any taped up or broken wires which would have led to the dimmer switch.

You can find some pretty weird things with imports (and all cars for that matter). On my R33, I found signs of previously installed boost gauge and several other things, behind the dash. (taped up wires and a blocked hose from the plenum, etc).

cheers.

julion Community Regular

julion

Posted
  • Author
Posted
Another thought,

It could have been a dual stage boost controller switch, There usally installed under so no (cops) see them.

(just an idea?)

hmm thanks heaps for that r0ma.. its a non turbo so it wouldnt be a boost controller switch, unless something very strange is happening :D I might have a look under the panel one day soon.. now one last question :) behind the back seats, just below the windscreen, right in the middle is a very funny lookin box with a strange lookin spherical fan or something, it seems to serve no purpose. Im a bit of a Newb when it comes to this kinda stuff so this is probably something that comes with every r32, but can someone temm me what it is !!! danke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PotatoCake
      Exhaust silencers/varex exhausts

      By PotatoCake · Posted

      I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • The Bogan
      NC MX5

      By The Bogan · Posted

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Murray_Calavera
      Exhaust silencers/varex exhausts

      By Murray_Calavera · Posted

      Nice, let me know how you find the 98 tune
×
×
  • Create New...