Jump to content
SAU Community

Recommended Posts

i use coolant... car coolant. lol. best temps i would be getting during summer would be from today so ill see how good it runs when theres a great delta temperature, and airflow coming from outside over the radiator.

ah cool mate, sorry I misinterpreted what you said .... Thermaltake cases/PSUs ftw :happy:

I haven't used their water cooling products, but find their heatsinks/fan setups to be very good. I never got into water cooling, always found the idea of water running through my PC way too scary!

yeah you dont have to run water in them as mentioned earlier alchahol/mix has no freezing point and chills more than water

well if u really think about it all u need is demineralised water and something to stop stuff growing in it. Your room would never hit 0 deg celcius to even freeze normal water :happy:

edit/ and as long as it wont react with any metals used in the loop

Edited by Bl4cK32

SAZilla,

What vid card and hows it clock with water vs std air? :laugh:

I've never bothered with water cooling but always wanted to have a play one day..

My overclocking adventures in the last ~12yrs have never seen a failure, I put this down to never using water, even when using a decent hsf heat becomes an issue before volts so your never really able to run enough volts to kill a chip.

im running a 7950GX2 video card, the "sandwhich" card. it is 2 7950 cores x2 on 2 PCBs which are sandwhiched together with 4 tall pins on 4 corners of the boards and a small PCIe interface in the middle of the card that links the two together. I cannot water cool it if i cant fit waterblocks inside the middle of the card and i dont overclock that card at all anyway cause im looking at selling it. the only waterblock at the moment i have is on the CPU cause im kinda trialling thermaltakes product.. the rocket.

last night it was at 33 degrees idle, and 40 degrees load, this is acceptable cause 22 degrees and then like 14 degrees at night is a normal winter/autumn/spring kinda weather on average and i can deal with that... but when the room abience is 30 degrees the idle temp is 48! the load temp 56! the cpus rating is only 60 degrees so its kinda dangerous. I should have gone with a radiator with a fan but i wanted to have no sound but the GFX cards fans. mind you.. my graphics cards idle temp is par 50 and load is 62. my computer runs very hot with these parts inside. last night was the first night in summer that every temparature stayed below 41 degrees and the HDD temps were 23 and 23 a piece (2 SATA2 HDDs 320gb)

performance can be much greater if you select the right equipment, and if u clean everything and install everything properly you will have no issues whatsoever with water cooling and there is no possibilty that anything will go wrong if it is maintained corectly.

Edited by SAZilla

im thinking now about how to utilise a car radiator for my system and a custom pump. i want to mount the radiator outside the house and thru my window run the pipes into the computer and have this driven by a better 12 volt pump thats alot stronger. my mate who has a sil80 said why dont u just intercool the f**ker and i said im not crazy. this is kinda a hobby for me until my case becomes a fish tank.

im thinking now about how to utilise a car radiator for my system and a custom pump. i want to mount the radiator outside the house and thru my window run the pipes into the computer and have this driven by a better 12 volt pump thats alot stronger. my mate who has a sil80 said why dont u just intercool the f**ker and i said im not crazy. this is kinda a hobby for me until my case becomes a fish tank.

I toyed with the idea of using an old car heater core (head down to U-steal it wreckers and pick one up cheap).

lol at the car rad idea.. Massive. Keep the shroud attach an old solid radiator fan to an old washing machine motor and your set. :laugh:

it would be easy to set up one from pool just need some long ass plastic tubing and the 12v pump would be enough. ill try it from a bucket tonight and see what happens, at least there is no chance of the lines bursting or caps falling off cause there is no pressure build up

Edited by SAZilla
im thinking now about how to utilise a car radiator for my system and a custom pump. i want to mount the radiator outside the house and thru my window run the pipes into the computer and have this driven by a better 12 volt pump thats alot stronger. my mate who has a sil80 said why dont u just intercool the f**ker and i said im not crazy. this is kinda a hobby for me until my case becomes a fish tank.

I was planning to use an old heater core I had lying around. A good resource is overclockers.com with a list of didferent car models, dimensions and inlet & outlet diametres. The articles a bit old but you get the idea

http://www.overclockers.com/tips1031/

I've seen other kits with a 40L plastic bin next to the PC with 2 hoses in it. Worked quite well.

Edited by L3nny

yeh take it... probably just needs some caps changed lol and a new fan.

i just completed the test... the results are clear. i went from 44 degrees idle to now 33 degrees idle after 2 hours of comp being on. my setup is the thermaltake rocket water cooler radiator sitting in a bucket full of water (like an internal resovoir of some sort), then a tube going in the radiator and then from the radiator into the bucket then the bucket into the CPU block lol. lmao i should get some pics up wait on lol. :(

Edited by SAZilla

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...