Jump to content
SAU Community

Recommended Posts

lol yes it was EOI.

And there is plenty of it.

The back room here just isn't ready yet.. I've got exams on so I'll get my arse in to gear and rig up some secure tables that span around the room. :rofl:

Power is the next issue.. Unsure if a single 15amp feed out to the back room that also powers lights to be sufficient. :S

yeh, should be ok, i mean, 6 computers with monitors no problem, 7-8 pushing it, id think about getting a long extension cord from another section of the house to power any more than another 4. 12-16 people is the sweet spot in numbers anyway, less its boring after a while and more its to much trouble. get every1 to pay around 15-20 bux for power and food/drink for the day and BYO alco.

In the mean time if any one runs in to a sparky ask him how many pc's he thinks its safe to run off each power point. i.e power boards. :S

I've got 6 dual outlets in the same room.

Obviously we will need a pair of headphones each also. :P

yeah I would have thought 6 PCs per power 'zone' .... normally you would have 1 zone per section of the house (most houses have 3 zones), and likely all of the 6 power points in your rumpus room would be on the same zone. So what you do is run an extension cord from the complete other end of your house, so you get 2 zones of power to use.

When we built our house I got the sparkies to put 3 different zones to my rumpus room for this exact purpose .... then I went and ruined a perfectly good LAN room by putting my beautiful pool table right in the middle of it :dry: .... I also have 3 zones of power in my office for the large number of electrical devices I run in here too :P

Well a power board can supply what 2400 watts can't it 240x10 and your average computer would use ~350W tops and a 17" LCD uses ~40w so that works out to roughly 6 PCs.

I may be completely wrong though

my pc uses 3 case fans, the psu fan running, watercooling pump, and 2 external fans on the radiator. The psu is a 550W antec jobbie + a 20" widescreen, so a couple more newer pcs would blow the power usage right up...

Edited by Bl4cK32

Hey Madaz,

this is the stuff that i am doing. At the moment this is only 69000 polys and my computer is starting to struggle with it.

i'm not sure if its only my video card that need up grading or more

I have a gig of ram which helps, The video card is only a 128mb ati radeon 9600.

got a 2.6ghz cpu

any suggestions?

post-26183-1163830866.jpg

post-26183-1163831013.jpg

No mate, starting to do it proffesionally (paid woohoo) now and just need a bit more power to help run smooth. The model in the pics is only 60pixels long I just need something that will stop it running jerky when doing the fine details

With regards to how many pcs you can run off one powerpoint, wouldn't that have something to do with how many amps each is pulling? Powerboards usually have a 10A fuse, regardless of how many outlets...

Is it possible to measure how many amps an average high-spec'd pc draws and use that to work out how many could be run safely off a single powerboard etc? I presume powerpoints themselves also have a limit to how many amps they can provide? dont know enough about the electrical side of things to go any deeper into it.

its also worth noting that a 350w power supply means 350w MAXIMUM (or "safe" maximum? before its likely to fail). It would normally run well below this amount, obviously depending on how much of the system you're using at any one time. I think the biggest power drawers are your video/tv cards and drives...from memory (used to be a tech years ago).

plus I only have 2 pc's (running off separate powerpoints) so no problems at all. :)

good luck with the "lan party" :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...