Jump to content
SAU Community

Recommended Posts

I have a R33 gts-t that's a bit modified and was looking a t getting a new clutch for it. My car is putting out 320hp at the wheels at 1.2bar boost at the moment and needs tuning so I want something that can handle at least 600hp@flywheel.

It currently has an hks triple plate solid centre clutch which works great and never slips but the problem is that it makes the car hard to drive.... i either have to give it some revs and take off spinning the wheels a bit or ease it out very very slowly over about 5seconds. I was just wanting to know if anyone has a good clutch in their car that can handle this power without being too difficult to use that they can recommend. At the moment I am thinking about OS Giken or Ogura Racing Clutch Twin Plate Sprung Centre Clutches.I don't want to drag it with this clutch or do like 6000rpm+ launches just be able to still rev it out without the clutch slipping.

Also does anyone in my area have a clutch of this type... i m in noosa on sunshine coast, qld.

Thanks for any help

Jamie:D

Link to comment
https://www.sau.com.au/forums/topic/10910-r33-gts-t-clutches-which-are-good/
Share on other sites

What does a clutch cost?

I guess my car will be going close to 200rwkw eventually and i'd like to put aside enough $$ incase i start having problems with the standard item.

Anyone have suggestions for a car that will be aiming for low 13/high 12s on the odd occasion while also being very driveable to work each day?

Mark

Hi guys, REV210 is right choose one for the horsepower you want, plus I have a simple rule;

for 2wd drive a twin plate is plenty, regardless of how you use it

for 4wd drive a twin plate is plenty for the street

for a 4wd street/drag car, a 3 plate is the go

BTW we use OS Giken as they have a nice range to suite the above.

Hope that helps

Is the following item (From $495 exchange) combined with a lightened flywheel worth worrying about if i'm going to keep below 250rwkw? or should I/can I just get a lightened flywheel with the standard clutch?

"UAS Modified sports clutch with 40% increased clamping pressure and 6 finger cinted bronze Cerametalic button clutch plate. Grips well lasts a long time and not savage on take up. Anti Burst Casting (Nodular Iron) pressure plate. We can rebuild and improve clutches for any car.

Supplied with new thrust bearing. Exchange for 300zx ,R33 GTS, R32 GTS-T ,Silvia, 180SX MR2, Supra."

Mark

Has anyone used or have an ogura racing clutch?? I have heard they are good but everyone seems to go wit os giken... just wonderin' if dis is cos os is betta or easier to get?

Also anyone able to tell me how much an os twin plate sprung centre clutch wit flywheel is gonna cost??? I have seen one for $3300AU. I'm thinkin that this is a bit xpensive howeva:confused:

ThanX

:werd: :Pimp:

Originally posted by Merli

http://www.skylinesaustralia.com/forums/sh...&threadid=11024

Near new NISMO Triple Plate Clutch for sale - $2500.

Sorry merli but i have a triple plate hks that is pretty much brand new. It is just dat it is a biatch to use. dis is y i m switchin to a twin. If anyone is after a clutch for dragging or racing though or is really co-ordinated than triple plates are awesome.... can drop it at 8000rpm all day and no slippage!! There u go dood free plug :Pimp:

LaterZ All

:werd:

I'm used to the triple now, but my parents need to be able to drive the car, that's why it has to go...

It's a clutch you can quite easily get used to, but not just hop in the car and drive it...

So r the exedy organic heavy duty singles able to handle 600hp@flywheel? Are they easy to use 'cos I heard that some singles are harder to use then a good twin plate?

:Pimp:ThanX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...