Jump to content
SAU Community

Recommended Posts

Hey guys and girls,

I know I'm only new to the forum and I've only had my car a few weeks but I have decided to sell.

1988 R31 GTS-X import *UNCOMPLIED* Very Cheap / Easy to comply. Bought in under 15 year rule.

Only done 77,000 GENUINE kilometres,

Was to be my drifter, but its too nice a car to destroy. Besides, my financial planner (READ: GIRLFRIEND) would like me to get a 4-door car. :P

Body is in excellent condition considering it's age, Few small dents and scratches, damage on roof from shipping, slight damage on front bar before it arrived (FIXED, just requires minor paint) Was in pretty poor shape when i first took ownership, but with 50000000 coats of polish she came up quite nice. Also arrived with GTS-R rear wing

Interior is immacculate.

List of mods include...

Later model ECCS engine, (comp even across the board, just serviced, Never had power run on dyno, just to check AFR's)

HKS Pod filter

Standard computer and turbo (10 psi, no shaft play or oil leaks)

Alloy Inlet pipe

All head studs replaced, exh. manifold machined, new gaskets (All done by ET)

S5 RX7 fuel pump

Stealth Garrett FMIC with Piping and Turbosmart V-Port BOV

3" Exhaust Technology Front pipe and Race Cat, 3" exhaust, (VERY QUIET)

Exedy 'super single' clutch *TWO WEEKS OLD*

Factory LSD (Super Tight)

Tein HR coilovers w/ new springs and JIC strut tops (FRONT)

KYB Sport shocks and stiff - as springs (REAR) *was intending to do rear coil over conversion*

Aftermarket Front Swaybar

R33 Adj. tie rods

Many other susp. mods

Excellent brakes; Upgraded Rotors and Calipers w/ Jap race pads, (Unsure of type, Bigger than standard, very good though)

B -Wave Handbrake pads + Yanuk cables (AWSOME for drift)

18" Racing Hart CR wheels w/ Nankang 215/35 R18 tyres (3 WEEKS OLD)

New Alpine 9847 head unit, DLS B5 5.25 2 way splits, 2x DLS 12" subs, 600watt Schneider 4 channel amp, 900 watt Boss 4ch amp, Fully Retrimmed boot, BIG Odyessy Dry - cell battery, Gold plated battery terminals

Nardi Wheel and momo g/knob

Autometer 'sport - comp' boost gauge

RAZO t/timer

2x OBX Fixed Race seats (Only one put in car ATM to replace shitty fiberglass seat car came with)

Probably more... cant think of anything else ATM

Comes with the following parts:

S5 RX7 550 cc injectors, cleaned and flow tested

NEW Monza alloy radiator catch can

NEW Greddy T/Timer

NEW alloy Bosch 044 fuel pump mount

probably a few more...

I was hoping for around $8700, as ive probably spent $6000 - $8000 on it, and its cleaner than some examples ive seen getting around, but as it's uncomplied i cant ask too much.

(Although Going price for a standard one is $7500 - $8000.)

I will not seperate anything from the car, and I would like to sell it to someone in adelaide if possible, as thats where it has to be complied im pretty sure.

Will supply ALL necessary paperwork and standard springs for compliance.

Got a quote for $800 to comply and take through regency from Lam @ A-JAP imports. (Its only a small buisness but he's really good AND quick)

Will put up photos in the next day or so, just as soon as i get hold of a camera, but as I would like to sell it in Adelaide, Adelaide people can just come and look at it

PRICE - $8700 ONO

Located in Adelaide,

Ring BEN on (08) 8443 6641 or 0422 081 905

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/
Share on other sites

Chassis no is HR31 -181273

Forgot to add that it has factory central locking, power windows, mirrors and steering.

Think I got it all now...... :P

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2010622
Share on other sites

Bump.

And price drop.

$8000. I really would like to sell this car.

This is the going price for standard examples!

I realise pics would help, so Ill post some up tomorrow.

Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2011957
Share on other sites

Not really....

rims - silvia or other,

susp. Have stock springs, just need standard front struts

fmic is legal due to standard piping

exh. isnt really loud, still has a cat.

still has standard computer and ALL emissions gear

just needs side intruision bars, unleaded fuel filler neck, flat R.V. mirror glass, and rear seatbelt and child restraint points if it is to be registered as a 4 seater.

Besides, Lam has a r31 coupe there already (which he wants $6000 for and its pretty heavily damaged) and last time i spoke to him he said he'd probably use standard stuff off that one.

and the quote he gave me was for dropping it off, picking it up in a fortnight complied, go get plates from motor reg.

easy.

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2012413
Share on other sites

Will remove rims and stereo and sell for $6000. Reall do want to sell

And that quote from Lam basically meant whoever buys it doesn't have to do any work, just drop it off and pick it up again...

Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2012444
Share on other sites

Bump.

And Price drop.

Must sell $7500 ono. This is the going price of a standard uncomplied one. And this ons has over 10K in mods.....

Anxious to get my new car... :)

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2017400
Share on other sites

The used car market is dead in the arse...along with the property market. Too many people over committed financially in your target market and due to the lack of proper jobs for people now (a lot of contract and part time employees) And overwhelming personal debt.

You will struggle to sell it.

No your not doing anything wrong.....

maybe complying it may help....

Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2020002
Share on other sites

If I had the cash, I would comply it. But i dont, and that's part of the reason I'm selling it.

Im flexible on price, and I've offered to comply it here if someone really wants it.

Oh well, see how we go.

Cheers for the input. :)

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2020044
Share on other sites

hey

have you advertised this car anywhere else, ive sold some uncomplied cars in the trading post before, and got a pretty good price for them.

sometimes people are scared to buy a car that isnt registed, but i dont know why, cause its not that hard to get a 15 year old import rego'd

somebody will buy that car soon, cause the price is very good, so dont worry bout it.

can you email me lams new mobile number, i tried his old one its its not on anymore.

thankyou

Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2023880
Share on other sites

hey

have you advertised this car anywhere else, ive sold some uncomplied cars in the trading post before, and got a pretty good price for them.

sometimes people are scared to buy a car that isnt registed, but i dont know why, cause its not that hard to get a 15 year old import rego'd

somebody will buy that car soon, cause the price is very good, so dont worry bout it.

can you email me lams new mobile number, i tried his old one its its not on anymore.

thankyou

In about 3 other forums, and in the trading post.

All I got was a bunch of test pilots and tyre kickers.

No worry, think I've got it sorted.

Car is stll for sale though...

Email on it's way.

Cheers for that :D

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/109141-r31-gts-x/#findComment-2024781
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know, that is exactly the thing that I was thinking a coupe of hours ago. I even had a plan for a meme, involving one big one, another big one, and the Old El Paso girl saying "¿por que no los dos?"
    • NoS, 2 of the big ones.
    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
×
×
  • Create New...