Jump to content
SAU Community

Recommended Posts

Seems to have some grunt at the end though. Definitely not stock!!

is that cuase the turbo taking the footage inst boosting it too keep up cause ive had a little squirt with 1 of these and it had a mod chip and a zaust and well he came of 2nd best by heaps

is that cuase the turbo taking the footage inst boosting it too keep up cause ive had a little squirt with 1 of these and it had a mod chip and a zaust and well he came of 2nd best by heaps

yeah monaros :D are hell slow!! altho 300kw gto might cook :D

all commodore fags say, "its been chipped" ... wankers :D

sorry by 1 of these i ment commodoor it wasnt the monaro it was a VX ss ... he also didnt want to tell hte the KW reading claiming he hadnt had it dyno'd

which me and my mechanic talked and said if u spent that much on chip and exhaust its definatly been on a dyno

ummm...correct me if I'm wrong, but the reason that commodore owners say "it's been chipped" is in reference to the Delco ECU's used in all the 3.8L V6 motors, where tuning is done by replacing a memory chip (memcal).

Not to be picky, but "it's been chipped" is a pretty darn accurate decription...

then again thats before LS1Edit came out, and people started tuning gen3's, which don't use a memcal

Yeah, can't really agree there either. The LS1 is an absolute animal of an engine, but in a different way so are the RB engines.. so don't take that as the signal to start yet another brickwall debate about the two. Madaz you said it's torque isn't too bad, but actually its the other way around.. at release the ls1 was heavily criticised for it's lack of torque and the way its power grew with revs.. so imagine when you accentuate that effect with a cam!!!

As for the sound of the car, personally I think it is the shithouse low-frequency response of the video camera's microphone that makes the v8 sound not too great.. I bet if you heard that in real life, it would be easy to appreciate. Also, as for monaro's being slow, this particular one obviously has a decent cam which can be heard from it struggling to idle... LS1's get bloody huge power figures from just a cam and the usual supporting mods.

(Please RB lovers, don't perceive this as an attack on jap motors, but it's the truth... a half-decently built 5.7L better make some power!!!!)

when i said about torque im going by a car i know nothing about for all i know it had a cam for all i know it may have gone like a bat out of hell with a better cam

i did complement him on his choice of exhause it sounded very crispy and had that down rev burble :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
    • Don't do what I did, use a 300000km old housing with billet gears. The old pump probably was clearanced with saw dust, Edward Lee's special engine treatment sauce and a good odo wind back. I had oil pressure issues, then replaces pump with new housing, new billet gears and 2x track day later binned a motor due to other oil related issues due to a previous engine builder. Long story short, buy a M2 or 3 or 4 N55/S55/S58 and enjoy life.
    • Yeah. "New pump" does not have to mean "massive pump".
    • Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more.   Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
    • Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
×
×
  • Create New...