Jump to content
SAU Community

compliance plate questions


equinoz
 Share

Recommended Posts

i got the blue japanese one but i don't have the green australian one. i also got a VIN number sticked on my car. i've renewed my rego last year with no problems at all so i guess my car actually got a compliance plate but the dealer forgot to stick that on?

Link to comment
Share on other sites

guys guys guys

please don't get me wrong on this trying to help.

One of three ways it can get regoed. One way can be without a plate if that person allowed to do the compliance work under the corrrect SEVS scheme which is due to be replaced in May by RAWS is as a test and evaluation vehicle in order for that person to be able to do compliance work on that model of vehicle ie Skyline R33 models etc. The CONDITION of this vehicle being able to be registered without a plate as a test and evaluation vehicle is that a compliance plate has to be affixed after a 12 month period has expired..... Registration will show as normal, but the vehicle cannot be sold without the plate.

I have been in this situation twice before had two vehicles done liek this and it took me over three years to get a compliance plate on one vehicle two on another from the dodgy compliancer who never went ahead and got compliance on this model. Only at last moment before a court appearance did compliance plates magically appear.

2) Personal import - blue plate

3) SEVS import complianced with green plate.

"there is no way anyone can forget to affix a compliance plate" it cannnot be regoed without it unless done in the above way. Excuse my harshness but sounds like someone is selling a porky - call him again and tell him it is a large fine to sell a vehicle without a plate and you want one affixed otherwise you will go to the authorities or take legal action..

Link to comment
Share on other sites

OMG ....

nothing wrong with Rebodie vehicles... a rebodie does not have a plate fitted(although some times the registry office gives them back to you and i have seen them fitted,however technically they shouldnt be fitted)...personal import plates are YELLOW in colour

and your vin is a imported vehicle vin anyway not a rebodie one.

Also if a rebodie vehicle has no plates..its not against the law to sell it......all the above are facts not some crap i have made up... they are the rules!!!! And there is nothing saying that a car that was bought in for compliance cant be registered as a rebodie then sold without a plate.....making a mockery out of all that sh_it that is written at the bottom of your import approvals.... Id say that if they tried to "do" you for doing this...in a court of law...youd win

Link to comment
Share on other sites

  • 1 year later...
i beleive that under the Raws setup ..the colours of the plates winn change....i think they will be magenta in colour

totally true,

I have a series 2 r33 that was only bought into the country in the last couple of months, i was imported under the RAWS thing ...

I have the normal blue plate from nissan, and a magenta type colour plate stating the compliance number, date, type etc etc

can take pics if anyone is really interested ...

Link to comment
Share on other sites

In NSW there is no legal requirement to keep a compliance plate fitted after your car has been registered.

Contact DOTARS and find out if you car has been complied in the past. If it has, they will re-issue a plate for ~$40.00.

Keep in mind that you will have trouble selling your car without a compliance plate.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...