Jump to content
SAU Community

Skyline R32 Gts-t $6900ono

JASSPEED
 Share

Recommended Posts

JASSPEED Contributor

JASSPEED

Posted
Posted (edited)

A customer has this car at my workshop and he wants to get rid of it. Its a 1990 R32 GTS-T Sedan Auto. Black with 69,000km. Its in ok condition however the paint is dull and its been sitting for a couple of months since landing. $6900ono "as is" with import approval. I can do the compliance for qld/nsw for $1400 if required. He may trade a diffrent later model 4 door auto car. Give me a call if you want to see the car.

Rob 0403754734

post-22278-1142131514.jpg

post-22278-1142131546.jpg

post-22278-1142131611.jpg

Edited by JASSPEED
Link to comment
https://www.sau.com.au/forums/topic/109271-skyline-r32-gts-t-6900ono/
Share on other sites
32 4whore Experienced

32 4whore

Posted
Posted

OK so its not complied. & you are willing to do this?

I live in SA and understand shipping here is at my cost.

I would like to know whats been done to the car? Its a type M i assume.

Oh and maybe edit the post as you have the car at $69000. LOL typo.

Are they original K's or you are not sure?

JASSPEED Contributor

JASSPEED

Posted
  • Author
Posted

I can do compliace but only for qld/nsw as our enginner is only registered to issue engineers certs for qld/nsw. I dont know what is required for SA. Prob cost $500-$600 to ship to SA. I dont think it would be worth it? I will have a look today and see if the car has any service books or service stickers to confirm kms

32 4whore Experienced

32 4whore

Posted
Posted

What do you mean it wouldnt be worth it.

I would do anything for a R32 4 door Type M with those K's. ANd for that price i would put it on the back of a truck and complie it down here. all up would prob coast me 8.5k or somewhere about that.

But yes if you can get the service history and what has been done to the car i would appreciate it alot.

Thanks,

Brenton

Blitz Grand Master

Blitz

Posted
Posted

Closed

JASSPEED: If you wish to advertise cars on this forum you are required to become a registered trader and pay to advertise.

Pm me if you would like further information

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...