Jump to content
SAU Community

Recommended Posts

Can anyone relate to similar experience...

I have just removed subs and amp from R32... and left head unit to run 4 speakers.

Upon turning ignition to "ON" the speaker will 'pop' loudly once, and then again once when ignition id turned off. Sounds like dodgey earth to me, so have re-established a new earthing point.

The funny (or not so) part is when the headunit fascia is removed when the ignition is on, and all four speakers will pop in a pulsing and repetitive way until the ignition is turned off.

Perhaps the headunit is faulty?

Link to comment
https://www.sau.com.au/forums/topic/109296-speaker-pop/
Share on other sites

Interesting! And you used the original red power cable, and ran your own ground?

It sounds a lot like electrical interference, the way it pulsates with the ignition on.

I could come up with things to check, but i'd have no clue whether they'd produce the symptoms you describe, and they'd just be the usual things that you probably already know. (wires grounding etc)

Wait for Chris Rojers ;o)

Link to comment
https://www.sau.com.au/forums/topic/109296-speaker-pop/#findComment-2013012
Share on other sites

Speaker popping can be caused by a number of things ranging from a bad earths or shorts (which you have said you have already checked) to a damaged components (damaged equipment could also have been caused by a plethora of things too so that must be checked also if damaged equipment is found to be the cause).:P

If you like, you're more than welcome to bring it down for us to diagnose for you.

Can you also list your component please?

Edited by Fhrx
Link to comment
https://www.sau.com.au/forums/topic/109296-speaker-pop/#findComment-2013100
Share on other sites

Speaker popping can be caused by a number of things ranging from a bad earths or shorts (which you have said you have already checked) to a damaged components (damaged equipment could also have been caused by a plethora of things too so that must be checked also if damaged equipment is found to be the cause).:P

If you like, you're more than welcome to bring it down for us to diagnose for you.

Can you also list your component please?

Appreciated thanks Fhrx. We're in Adelaide however.

The headunit is a Clarion unit of around 5-7 years vintage, and was working fine prior to the 4ch 600w US Audio Amp and wiring and twin DVC Orion 10" Subs, being removed yesterday.

I did not run a new earth, but rather sliced into the cigarette lighter earth, as time is lacking at them moment, with the car due at its new owner's property on Wednesday.

Im more and more convinced that it is a headunit problem, as the 'pop' will also occur when the power button is pressed with no keys in the car's ignition!!

Link to comment
https://www.sau.com.au/forums/topic/109296-speaker-pop/#findComment-2013313
Share on other sites

HI Pawley,

I have had this exact same problem with slightly different equipment.

The car at the time was a mitsubishi magna, system value was well over 20k, when the owner went to sell the car the system was removed except for head unit. Front and rear speakers were replaced with cheapo "hole fillers".

Essentially a deck running straight to the speakers. Same as your case.

We found it was the unit itself. When you run external amplifiers the units amplifier is bypassed and low level outputs are used - RCA's, these originate from the units pre amplifier not the units amplifier. Inside a unit it looks like this.

Laser -> processor -> pre amp -> amp

When the units amplifier was used however we too got the same annoying turn on/ turn off pop through the speakers.

We eventually traced the fault to an internal fault with the units amplifer power supply. I cant remember the exact component as this was around 5 years ago.

The solution.

Well, we removed the customers Nakamichi unit and replaced it with a cheapo RRP approx $150. Sure it sounded crappy ( compared to 20k's worth) but the problem was fixed for the sale.

What I would recommend to you is to go and source a low price cd tuner and put it in. The instal is simple, as you would know, and there are some great bargains at the moment on 2005 pioneer product that retailers are trying to clear.

I was in my Local Repco store the other day and the Pioneer DEH1750 was $119 ( this is just cd/am/fm) and the Pioneer DEH2750MP (cd/mp3/am/fm) was $159. Excellent prices for these models and surprisingly cheaper than my local Audio place.

Its just a suggestion, but for the sake of $119 i would just do it.

PJ

Link to comment
https://www.sau.com.au/forums/topic/109296-speaker-pop/#findComment-2013575
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
    • Just putting it out there, that's a decent list. You would be better off *not* doing *any* of that and buying someone else's modded car. Like mine. Or anybody else's. Yes it's lotto dependent and all this and that but that 70K (remember, double your guesses) could go elsewhere. Keep it stock, save your money, go lowball @Dose Pipe Sutututu :p
    • Does not mean what you think it means. The continual rising coefficient is the coefficient of friction that continues to rise with increasing temperature. Not "rising during a single stop", except inasmuch as the brakes should get hotter during a single stop. The RR would not be the best choice for a streeter. Yeah....no it's not. JAX would rummage around in the "shit pads we use for all shitboxen that come in here" and install those.
    • @Kinkstaah I've got my list.. but most of them is to do if I ever win the lotto
×
×
  • Create New...