Jump to content
SAU Community

Recommended Posts

Geez I go off for a couple of weeks and already the children are not playing well together.

The reason why a twin plate was decided on was because John expressed to me the need to have his clutch hold 300-350kw at the wheels and he didn't want a button single plate. A single plate organic will not handle 300rwkw so the choice is fairly clear.

Twin plate clutches ALL use button style plates but the paddle style button configuration was chosen for lightweight instead of the heavier full plate. The buttons are also rivetted on instead of sprayed on and the cost to overhaul this particular one is about 1/3 of the cost of the exedy hyper twin.

The Exedy hyper twin puts too much load on the crank plate, wears out the carrier and the pedal is three times heavier. This clutch has the same light feel as a stock SR20 clutch and will hold 1000hp at the wheels. It does not drive anywhere near as harsh as single button clutch.

Yes it does grab hard but you can ride it so it drives a lot easier than the button singles.

If you have never owned or installed a twin plate then please look but keep the uneducated comments to yourself. A lot of time went into the development of this clutch and it is by far the best one on the market. Anyone who owns a car with near 300rwkw will know that a single plate is a waste of time and will understand the choice. If you are one of these people then maybe you should ask John to take you for a drive and I'll guarantee you will be impressed with not only the drivability but also the pedal feel.

Edited by 3lit3 32
  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

Dan thanks for the PROPER explanation regarding choice.

But seeing as I HAVE installed these before and HAVE driven cars with these in them, depending on friction compounds, they can be a bitch.

So I guess the uneducated comments were not addressed to me...lucky....

On a side note how come not a sprung centre plate, these would still provide enough friction and clamping but without the overall harshness and vibration that inherently accompanies an unsprung centre!!! I agree with why the button and not the full face, however, clamping pressure is greater using buttons than full face, so having it being not as heavy I find a little bit hard to swallow, that being said I am happy to be proven wrong. Also the rivets are always better to overhaul...I think they are the bee's knees when it comes to replacing!!!

I can see why multiplate has been the choice here, single plate, either button or otherwise will not hold 300rwkw...well it will but not for long...

Edited by Bobjones

I was wondering if you were gonna come back dan and explain to everyone...

Good on ya...

I had a single plate button in my GTS-X and it could slip quite a bit once you got used to it... Most would jump straight in and stall the car...

Brisbane Tunning in woolloongabba, was done this morning.

The injectors will be upgraded within the next week or so.

Just going to look around for what would be best. Was recommended to go more then 550cc but less then 650cc.

Coilpack will also be replaced as coilpack 4, 5, 6 aren't all that good.

Brisbane Tunning in woolloongabba, was done this morning.

The injectors will be upgraded within the next week or so.

Just going to look around for what would be best. Was recommended to go more then 550cc but less then 650cc.

Coilpack will also be replaced as coilpack 4, 5, 6 aren't all that good.

550's will do what you need but they will be up around 90% duty I would think. The next step up from them are the 650's but I wouldn't go over that. I've gotta re-check my HKS injector prices and I'll let you know John. There is only 3 Sard's left from my supplier and it won't be for a while until they have more.

Nismo and most other only offer 550 or 740 direct drop in, unless you are going to change the rail...

Good result though so post up a sheet!!!

i`ll post up dyno sheet tomorrow.

i left the sheet here at home when i got back from brisbane tunning.

so i`ll take it into work tomorrow and scan it and then post it up here.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
    • Yuh, My new R34 box is sitting on the workshop floor (in its large shipping box, which is a nice thing on its own), along with a front plate to convert to push clutch. There was no way I was interested in rebuilding my existing one. Was only partly interested in the risk of buying a used one. But, if you want a 2nd hander, I can point you to one in/near Melbourne at least. @Komdotkom has one that should be in good enough condition to be usable. I don't think it's in a for sale thread, you'd have to message him. @redzedhas one that definitely needs a rebuild.
×
×
  • Create New...