Jump to content
SAU Community

Recommended Posts

Hello, I am selling this car on ebay and thought i might give you guys a link.

eBay Link

Here are some specs:

Body Styling:

Pumped Guards

Resprayed Metalic Purple

Limited Series II Bodykit (very rare)

19" Mags

"Shaved" lines and boot lock

M3 Side mirrrors (made to fit)

Drive Line:

Manual, auto electronic drag gearbox ($8000 gearbox)

4000rpm custom build stall converter

Tightened limo diff

Large race transmission cooler

2" Wheel extensions

JH Magic adjustable coil overs

Large race sticky break pads

Fuel/Ignition System:

700hp oversized injectors

600hp bosch fuel pump

Malpassi regulator

Modified crank angle sensor

EMS Computer system

Performance:

GTR 1000hp intercooler

Garet T04 Turbo

Spagetti built manifold, with equal runners heat wrapped

Huge large capacity polished plenem

Stainless polished pipework

XT huge throttle body

3.5" Stainless pipework, 5" Canon

Blitz BOV situated at front for loudest noise (filter to quiten included)

Blitz turbo timer (talks to you in Japanese)

======================================

Has just over 37000kms on the clock, was imported with around 32000kms. so has only done around 5000kms since in aus.

Im looking for around $17500

Location: Newcastle, NSW

Dyno graph:

fp_pic_dyno.jpg

Edited by necrodon
Link to comment
https://www.sau.com.au/forums/topic/109424-1997-r33-gts-t-skyline/
Share on other sites

is this for real ? stock internals ? waaaayyyy cheap... its just to good to be true... no way.. paint job alone cost arm and a leg yet the amount of mods done for just 17,500?

ok... whats the catch ?

No catch, the interier is all stock.

The car is in beautiful condition, very fast car...

the bids on ebay are already around the $6000 mark, so im hoping to get what i want for it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PULSAR PSR2860R 0.86A/R or 0.64 GEN 2 Turbocharger Both are -50*67mm 8 blade billet compressor wheel Cheers  
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe.....EDIT... nope, the Kraken is a cast jobbie, the REv9 uses welded up stainless, plus $8000 AUD before shipping, installation and tuning) Where else in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit that Pulse fitted, and it was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe), where in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit, and was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet  
    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
×
×
  • Create New...