Jump to content
SAU Community

Exhaust Shop

Mushroom

By Mushroom,
in Queensland

 Share

Recommended Posts

Mushroom Veteran

Mushroom

Posted
Posted

Guys I know I should do a search but it is a lot more fun stirring people up. I need to find a performance exhaust shop near moss st so I can get my exhaust altered and silenced a bit (those who have seen and heard my car will understand). Now before the barrge of reccommendations I am looking at putting out a decent amount of power and the occasional drag/track day could be in order hence why I want only places that have done peoples exhaust not just what people have heard.

thanks

shroom

Link to comment
https://www.sau.com.au/forums/topic/109795-exhaust-shop/
Share on other sites
MountainRunner Mentor

MountainRunner

Posted
Posted (edited)

The serious track day guys turn up with a set of side pipes for the track, so they don't have to compromise. Usually swap them pretty quickly, like MacAttack.

As a bonus, how good does that sound !!

Edited by MountainRunner
Link to comment
https://www.sau.com.au/forums/topic/109795-exhaust-shop/#findComment-2023397
Share on other sites
Mushroom Veteran

Mushroom

Posted
  • Author
Posted

nismo33 = thanks for the help...not I am after proven shops.

I did look into the EVC but they only muffle 10 decibel and cost about 800 so can't see the cost vs benifit

I currently have a 4' straight through exhaust with a HKS super Dragger Pro muffler (6' tip) and a screamer pipe. I was thinking of adding a new cat and a couple of mufflers and plumbing in the screamer pipe. But flanging them so I can look at removing them when I go to some motorsport events

Link to comment
https://www.sau.com.au/forums/topic/109795-exhaust-shop/#findComment-2025392
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...