Jump to content
SAU Community

Recommended Posts

help need to find someone who has contacts with nengun or someone who has an accound with someone who can get me a turbo kit from japan or australia for my rx8, ive been looking at modyourcars website and they have the kit for $7500 recently bumped up from $5900, but nengun has the same kit for 4500 delivered, please if anyone can help be much appreciated, dont feel like handing over 4500 to someone in japan not knowing if i will get my kit.

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/
Share on other sites

I recommend using Perfect Run

Website is www.perfectrun.com.au

I've bought plenty of gear from him, and so have people I know. Never been a problem, not even once. However, you might have to pay some customs tax on it when it turns up. But you'll still save heaps.

He has the greddy turbo kit for around AU$4300 + shipping:

http://www.perfectrun.com.au/performance%2...ddyturbokit.htm

Checky-checky check it out!

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028100
Share on other sites

Why not check out some Ausie kits going around, you might pay a little more, but the quality of the kits are very good and you have the added bonus of local warranty etc.

Example this is taken from Rotor Master (I know its a supercharger, but its still good).

http://www.rotormaster.com.au/subPage.asp?cid=50

Specifications:

> Coolest charge air temperatures for maximum power and engine reliability

> Highly efficient C2 ProCharger

> Rigid 6061 T-6 CNC machined brackets

> Patented self-contained technology eliminates need to punch a hole in your oil pan

> Patented friction reduction drive for least parasitic load and greatest durability

> Helixed 7071 T-6 billet impeller

> Highly effective and high flowing DNA Motorsport air-to-air intercooler system for easy installation

> PowerMod - ProSequential advanced engine management system

> Complete bolt-on system

> No bodywork cutting required

> OEM fit and finish

> Factory smooth driveability for daily use

Priced at AUS $11,900 in boxed form (ready to install) the SuperCharger kit is modest value with a 200+ kW rear wheel result with a standard exhaust system ensuring noise maintained at an appropriate level.

There are two turbo kits available on this website:

http://www.turbo-kits.com/rx-8_turbo_kits.html

Plus other accesories available if going the turbo route.

I was reading about another one recently in a magazine, i'm pretty sure it was Zoom, it was also an Australian kit. I thought it was ASE but I checked their website and it wasn't them?

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028446
Share on other sites

Why not check out some Ausie kits going around, you might pay a little more, but the quality of the kits are very good and you have the added bonus of local warranty etc.

Example this is taken from Rotor Master (I know its a supercharger, but its still good).

http://www.rotormaster.com.au/subPage.asp?cid=50

Specifications:

> Coolest charge air temperatures for maximum power and engine reliability

> Highly efficient C2 ProCharger

> Rigid 6061 T-6 CNC machined brackets

> Patented self-contained technology eliminates need to punch a hole in your oil pan

> Patented friction reduction drive for least parasitic load and greatest durability

> Helixed 7071 T-6 billet impeller

> Highly effective and high flowing DNA Motorsport air-to-air intercooler system for easy installation

> PowerMod - ProSequential advanced engine management system

> Complete bolt-on system

> No bodywork cutting required

> OEM fit and finish

> Factory smooth driveability for daily use

Priced at AUS $11,900 in boxed form (ready to install) the SuperCharger kit is modest value with a 200+ kW rear wheel result with a standard exhaust system ensuring noise maintained at an appropriate level.

There are two turbo kits available on this website:

http://www.turbo-kits.com/rx-8_turbo_kits.html

Plus other accesories available if going the turbo route.

I was reading about another one recently in a magazine, i'm pretty sure it was Zoom, it was also an Australian kit. I thought it was ASE but I checked their website and it wasn't them?

do you think 12k is worth 200rwkw, i dont think so

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028597
Share on other sites

what you looked at was for a supercharger kit, they are known to be expensive.

look at the turbo kit

http://www.turbo-kits.com/rx-8_turbo_kits.html

theres one for $4K suppose to be 260rwhp

that power figure is only on 5.6psi, i spoke to c and v the other day and they gaurentee it will make much better power at 10psi daily driver, over 350, i dont care im gonna risk it, if anything i would be a crayy tyre fryer

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028929
Share on other sites

I recommend using Perfect Run

Website is www.perfectrun.com.au

I've bought plenty of gear from him, and so have people I know. Never been a problem, not even once. However, you might have to pay some customs tax on it when it turns up. But you'll still save heaps.

He has the greddy turbo kit for around AU$4300 + shipping:

http://www.perfectrun.com.au/performance%2...ddyturbokit.htm

Checky-checky check it out!

i second this guy. perfect run have prices as good if not better then nengun and greenline. there service is better then both, i have dealt with all 3... and the best part of it is..... THEY HAVE A SHOP IN SYDNEY !

so give them a visit and pay in person if you wish :(

i would get one but they dont speak english and the only way to contact them is by email, bit sus to me

wrong, see what i said above ! go see them in person if your real worried..

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2030898
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...