Jump to content
SAU Community

R32 Gtst Stalling And Power Cutting Out

barnoon

By barnoon,
in Engines & Forced Induction

 Share

Recommended Posts

barnoon Experienced

barnoon

Posted
Posted

Hi guys been having problem with my R32 GTST lately, just some info on it first, stock turbo, gtr front mount, turbosmart bleed valve, pod filter, 3 inch turbo back exhaust, apexi bov.

The problem im having is very intermittent sometimes I can drive with no problems for a whole day ,ive only noticed it happening when the cars warm but sometimes when im around 2000rpm in any gear the car just loses all power, I can put my foot flat to the floor and nothing will happen and then all of a sudden it will jump to 3000rpm then no higher, sometimes after this happens I wait a few seconds then its fine other times it will then stall, when I try to restart the car it is very hard to start and needs me to rev it as its cranking over, sometimes once its restarted it will work fine again and sometimes the whole process will repeat itself, it can happen any time even while cruising along in say 4th the revs will just get stuck around 3k.

Ive also noticed since this problem started the car is idling quite low sometimes around 400rpm.

Any suggestions what it could be as its doing my head in,

thanks guys.

d0p3y Grand Master

d0p3y

Posted
Posted (edited)

Hey Guys,

Dave & I cleaned the AFM on his car last night. So far it seems a bit better but time will tell as it hasn't been taken for a good drive yet. Will let you know how that goes. If you have any further suggestions or comments let us know!

FYI; It's running 11psi.

Ryan

Edited by d0p3y

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      I think my main complaint with your idea is that there is a veneer of idealism spread across it. You want the simple numbers to make it easier, but all they will do is make it easier for someone to come to the wrong conclusion because the fine details will kick them in the nuts. As it is right now, the tiny bit of arithmetic is NOT the obstacle to understanding what will fit and what will not fit. The reality of trying it is what determines whether it will fit. If you had a "standard rule" that R34 GTT guards have that magic 100mm space from the hub face to whichever side you were worried about, and someone said "excellent, this wheel is only 98mm in that direction, I'll just go spend $4k on them and jam them on my sick ride".....they would just as likely find out that the "standard rule" is not true because the rear subframe is offset to one side by a fairly typical (but variable) 8mm on their car and they only have 92mm on one side and 108 on the other.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      Ah ok interesting to know.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
×
×
  • Create New...