Jump to content
SAU Community

Recommended Posts

pplz i brought a power fc off a memeber on here just finished rebuilding my motor went to start it today and the power fc wont start the car when i turn it on and the fuel pump wont stop running and all the lights on the dash flicker

so i grabbed a standard ecu and it starts can somone out there help me asap as im in need of this car so i can go away

Link to comment
https://www.sau.com.au/forums/topic/110114-power-fc-wont-start-the-car/
Share on other sites

yes series 1 and series rb25 use the same model powerfc.

the only suggestion i can offer is to

check the powerfc is connected properly (loom plug is in OK)

no bare wires on the loom are shorted out

no wires loose or not connected properly

the powerfc doesnt have a burnt smell to it

does the hand controller come up and run ok if you just turn to ON and don't start the car? like can u actually use the hand controller like this?

umm no boost kit that i know about but how do i turn it off also no burnt smell the screen flashes with the sound of the clicking of the car its lights up i might try the power fc on a mates car

how do i turn the boost kit off i dont think i have one ???

try it witha jumper battery connected, noticed mine turns off and will not start the car without heaps of power..

plus it always turns on the dash lights then switches them off, clicks then they come on and car starts..

i cant get into the menu the screen flashes on the hand controller the relay in the back on the car in the boot next to all the fuses clicks as well while trying to start

i pmd the guy who sold it to me no reply yet

it was brand new im just hoping i can fix it the car has being off the road for 5 months now icthing to get it going

if i put up the numbers of the ecu can someone tell me wat model it is for ??????????

on the side of the ecu it should have the the model number

your looking for ECR33 or RB25 something something which should confirm the model number. its on a white sticker

when mine was fried the screen would go crazy and make constant ticking noises and never boot up

well the way i figue it can be the relay cause the stock ecu starts it no props im goin to try the power fc on my mates car today and ill post some numbers up if i cant get any futher with it

johnny cash : slept like a log just finshed work at doms

hey, mine did the exact same thing when we had the AFM wired up wrong. All the dash lights flicker on and off, the fuel pump goes flat out, and then eventually the fuse blows and the dash stops flickering.

Scared the shit out of us. No damage to the powerfc, just a blown fuse.

If its not the AFM, it will be something else shorting the f**ker out.

Good luck mate, and be careful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...