R33 Vlsd Diff In R32

[datto260Z]

i need to know if the R33 VLSD will bolt up to R32 GTS-t non-turbo axles.

tailshaft is not an issue as an engine conversion has been done and we need to custom make one anyway.

[T04GTR]

only if the stub axels have the same bolt pattern

[T04GTR]

ie:its probably got the 3 times 2 bolt pattern. it should alreaddy have a limmo.

ohh the shafts. series 1 r33 will fit.

but check the bolt pattern(same length but)

[datto260Z]

it didnt have a diff in it when i bought it just the axles because it was a non-turbo automatic shell.

thanks for the info anyway

[blind_elk]

it didnt have a diff in it when i bought it just the axles because it was a non-turbo automatic shell.

Then it's not a GTS-t (it's a GTS, the "t" is for "turbo").

Any R32 / 33 / 34 diff should bolt up, as they are all based on the R200 differential. However, the output shafts may be different, having 5x1 (?) or 3x2 bolt patterns for the half shafts to connect up.

[datto260Z]

thanks for info, got carried away with the model names as i own three skylines so you will forgive me.

can anybody be definite on the bolt pattern of gts half shafts?

[Duncan]

i dont' know the gts pattern although I would guess they are one of the 5x1 patterns.

But...if there are no driveshafts it doesn't matter just get the 3x2 pattern (GTR) ones. And if there are driveshafts you can check the pattern urself