Jump to content
SAU Community

Recommended Posts

Is it worth replacing the stock engine fan on a rb20det with an electric unit to gain extra power ? Is this a common mod or do most people not bother?

I've heard you can expect 10-15 hp more from an RB26DETT. Not sure how the stock fans compare between this and the RB20, but I'll bet you'd realize a gain.

My experience has been that it's not worth an engine for the sake of a few kW. I could not keep the engine properly cooled after I installed a thermo fan. All was OK once I re-installed the factory fan.

Cooling is a dangerous thing to fiddle with, I have recently converted to thermos and have had few problems however so far (grasps wood with both hands). There is a little power improvement but that vanishes whenever the fans come on (which seems to be never when the car is moving so far). I did it because my stock fan had turned to rubbish. This is on an RB26, leave the stocky unless you need to change it.

I used the 16 inch davies craig thermo. It is easily as good as the factory fan and fits in the shroud with very little modification.

The key is to retain the fan shroud or make up a new one, otherwise the fans aren't as efficient at drawing air through the radiator.

I think you'd LOSE a little bit of power if the RB25 pushes more air. =-]

Not necessarily, if the fan blades are more efficient, you can get more airflow with less drag on the pulley system.

but craved is right, I swapped it over onto my rb20 and noticed it gave better cooling... its a slightly better design, like many things on the rb25.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • God I love shiny engine parts 🥰 Are you looking for more horsetorques in the mid range? (Smaller cam) Or just more horsetorques every where? (Big heads and bigger revs) Assumption: they were not bought late night shopping on the interwebs after drinking too many beers, which is typically how I pull pins on things......🤣 The evolution of your car is coming along nicely, I sometimes wish I didn't get bored with my cars and keep flipping them, maybe the MX5 will be different  
    • I got the hazards working! Turned out it was disconnected! Indicator stock still isn’t working. I took the steering shroud off and there seems to be a third connection missing I see two small white connectors but they don’t fit the indicator switch unless they need a short lead to convert the connector type. Can someone point me in the direction of the wiring diagram for the indicator switch?   https://share.icloud.com/photos/0e8ReiFSLBVJsTPUKKfA_1IdQ  
    • All of your suspension bushes/bolts etc, should also only ever be tightened when the car is sitting with full weight too.   IE, jack it back up, shove a heap of stuff down so you can lower the wheels onto so the car is "on the ground" but you have room to get under it.   It's why when properly done, you should be able to remove the shock and spring, but the arms won't go to 100% droop. If you don't do the above, you'll destroy your bushes.
    • We have some more genuine Japanese legally decommissioned car number plates in stock 🙂, as well as the plain white 40mm hole cover: Tama 400 No 12-41: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-no-1241 Morioka 300 Te 43-58: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-te-4358 Plain White 40mm Hole Cover: https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-40mm-hole-cover-white There's also a yellow plate for Kei cars with the corresponding yellow 40mm hole cover sold as a set: Tsukuba 581 Ii 64-66: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-single-number-plate-ii-6466 Also some Skyline 1/43 scale models: 1989 BNR32 Nissan Skyline GT-R (Silver): https://www.oemsoko.co.jp/products/rare-ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver 1989 HCR32 Nissan Skyline GTS-t Type M (Red): https://www.oemsoko.co.jp/products/kyosho-original-1-43-hcr32-nissan-skyline-gts-t-type-m-red
×
×
  • Create New...