Jump to content
SAU Community

Recommended Posts

Is it worth replacing the stock engine fan on a rb20det with an electric unit to gain extra power ? Is this a common mod or do most people not bother?

I've heard you can expect 10-15 hp more from an RB26DETT. Not sure how the stock fans compare between this and the RB20, but I'll bet you'd realize a gain.

My experience has been that it's not worth an engine for the sake of a few kW. I could not keep the engine properly cooled after I installed a thermo fan. All was OK once I re-installed the factory fan.

Cooling is a dangerous thing to fiddle with, I have recently converted to thermos and have had few problems however so far (grasps wood with both hands). There is a little power improvement but that vanishes whenever the fans come on (which seems to be never when the car is moving so far). I did it because my stock fan had turned to rubbish. This is on an RB26, leave the stocky unless you need to change it.

I used the 16 inch davies craig thermo. It is easily as good as the factory fan and fits in the shroud with very little modification.

The key is to retain the fan shroud or make up a new one, otherwise the fans aren't as efficient at drawing air through the radiator.

I think you'd LOSE a little bit of power if the RB25 pushes more air. =-]

Not necessarily, if the fan blades are more efficient, you can get more airflow with less drag on the pulley system.

but craved is right, I swapped it over onto my rb20 and noticed it gave better cooling... its a slightly better design, like many things on the rb25.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...