Jump to content
SAU Community

Piaa Sports Mesh

Sidmiester

By Sidmiester,
in Classifieds

 Share

Recommended Posts

Sidmiester Enthusiast

Sidmiester

Posted
Posted (edited)

Hi all. I have a set of 18" PIAA Sports Mesh wheels for sale which comes with Pirelli P7000 tyres.

Wheels are in perfect condition and look awsome on car.

LHF has very small gutter rash, but not really noticeable. only if you look for it.

Wheels suit skylines, 300ZX and other cars with same stud patterns.

Fronts: 235/40ZR18. 50% Tread.

Rears: 265/35ZR18. 20% Tread.

Cost: $900

BARGAIN!!! MUST SELL!!!

If interested, contact me before 1pm weekdays or anytime during weekends on:

Mob:0423 323 370

email: [email protected]

Price drop to $750.

Can't get any lower than this.

post-27449-1142770117.jpg

Edited by Sidmiester
Link to comment
https://www.sau.com.au/forums/topic/110283-piaa-sports-mesh/
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      I have one and it was at ~43.5PSI.
    • GTSBoy
      RB20DET lean on cold start

      By GTSBoy · Posted

      Put a pressure gauge on the fuel rail.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • luke gtr
      Spotted on the street....

      By luke gtr · Posted

    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...