Jump to content
SAU Community

Recommended Posts

Hey Guys,

Everyone Been good help on here so far and got me through,

This time I have tryed so much and no luck so far.

My R33 drops idle intermitently and then cuts out, on idle or even driving.

The car seems to drive fine then jsut looses power and then drops to low idle and drops out, then comes back after bout 20 seconds.

I have replace :

1 Fuel filter

2 spark plugs

3 o2 sensor(with a new 3 inch dump pipe.)

I starting to run out of ideas.

I had a performance company lookat it and they new crap all. i won't mention the company name yet.

I thinking all that left maybe be fuel pump or somthing.

It only happens everynow and then, and is now happening more often.

I have minimal mods. basily increased boost the biggest.

Anyone have any ideas please let me know.

I to the point where i might have to get a machanice with a diagnistics system look at it.

Any help or ideas is a help.

It starting to cost me too much,

Thanks Rob :(

:(

Sounds like what my old vl did. Ended up being the crank angle sensor. Just a stab in dark.

Thanks mate, any feed back good feed back,

Could be, wat the crank angle sensor do, and how much to fix that u recon ??

Thanks dude

Robz

:)

It's a distinct possibility, but I would have thought u'd have trouble throughout the rev range too if it was the CAS, however depending which 1 of the two reference signals is dying you may get away with a few extra revs. If the other dies though, u'll have nothing. Is it happening more when it's hot or on a hot day out of curiousity?

It's a distinct possibility, but I would have thought u'd have trouble throughout the rev range too if it was the CAS, however depending which 1 of the two reference signals is dying you may get away with a few extra revs. If the other dies though, u'll have nothing. Is it happening more when it's hot or on a hot day out of curiousity?

Hey Electro, well it mainly happens after a drive after it has warmed up, or more when i have given it to her, less likley to do it if i go real easy,

so yer coudl be wat u thinking, it has a los of power over normal rev ranges too, it not like it ment to be, that wat i getting at, i always throught it was fuel or air related, so i minimissed that and done wat i can, so looks like could be some sensor.

any more info/input is all good,

thanks mate

:P

Starting to sound like a pretty good chance that's ur problem. Also if you shut it off for a few minutes to heat soak & then try to start it again but have trouble then I'd place very high odds on it.

It's usually under heat that they fail, & sometimes it is intermittent, electronics & heat are a real pain when combined.

If you're worried that you are going to waste ur money on a new sensor though, take it to a deacent auto elec that specialises in EFI technology & make sure he has all the equipement (IE occilloscope and diagnosics equipment to plug into the ECU) and make sure he know's what he's talking about. If he doesn't have any knowledge of Nissan CAS being a problem then run.

hey guys,

thanks for all the input, i today have just taken to northside EFI at brendale, and he got all teh gear to test it, i told him wat i have done and explained wat u guys recon it could be.

hoping he will find and won't cost me the earth.

:( heaps hey

rob

:P Hye guys,

Problem at conclusion and all solved now.

My mechanice who did the best job( Ron at Northside EFI at Brendale)

found that is was the Air Flow Meter, and my fuel pump was playing up too, not holding presure.

So the main problem being teh AMF, i sorced one down second hand, from Driftking at Geebung for mad price. put on tonight and the car goes harder and better that before.

Thanks everyone for your help.

I have spend some money on it, but i got there, got a car full of new components now.

Cruise on boys

Thanks

Robz

Cool good to see u got it soughted out. I had forgotten that the AFM is a common problem with 33's. Reckon I'll be getting a Power FC & pissing off my AFM all together if it starts giving problems on mine. Will replace it with a MAP sensor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Aren't these run off of high voltage in OEM applications? Like 200+V. Or at least 48V in mild hybrids. At ~18,000 BTU ballpark nominal capacity the power draw is at what, 2.2 kW? ~185A is a pretty crazy amount of amps. At 200V it's only 11A. The 70A nominal kits with up to 100A peak draw I see for stuff like classic Porsches have pretty substantial compromises like shutting off at idle and not actually managing to keep the interior cool in hot conditions because they can only output like 6000 BTU. IMO if I had to pick what high amp draw component to retrofit to these cars I would start with the engine fan, not the AC compressor. You need an ~850-1000W brushless fan, something like this: I would love to see the data but I would bet that whatever you save by running the AC compressor in a more efficient regime with an electric motor you're probably losing to conversion losses anyways. It's not really like a clutch fan where you're losing power all the time even when it's nominally disengaged and it gets worse as it engages because the envelope tracking isn't that precise.
    • I am a volunteer marshal at the Grand Prix. As such, I get a "friend / family" ticket. It is a general admission ticket, valid for all 4 days. Anyone interested in my spare pass, please DM me. Ticket is "free, gratis and no expense".
    • agreed, the price vs gains it’s there.   unless you go china supercharger. Temu racing anyone?😂https://www.facebook.com/share/15nkfpsg7Z/?mibextid=wwXIfr that was one of the ones that popped up on my feed 😂
    • Bit of a long shot but if anyone has 4 of these laying around in new or near new condition. I will happily buy them off you.     https://skylinespares.com.au/product/stabilizer-door-glass-inner-new-8032404u03/?srsltid=AfmBOop6L5EgUFaHPHiVXoAhv5k8aJYwc77nGmoApp-hY03OiOsNVaOv Thanks 
    • I'm wondering is the Toyota and Mazda "collaboration" could see that new Toyota ???G20 ??? turbo engine that they have been showing off recently into a future MX5, apparently it's good for 400hp out of the box That could easily, possibly, be much better than the last collaboration between Toyota and Subaru with the boxer engine in the twins
×
×
  • Create New...