Jump to content
SAU Community

Recommended Posts

yes a stock GTR is around 180 - 200kw on most dynos. a few kw more with exhaust etc.

i would go.

boost controller (run 1 bar boost)

apexi pods in a custom box

3 inch cat back exhaust

front pipes

dump pipes

Power FC

cam gears (both inlet and exhaust)

and you will get around 240-260rwkw if everything is working properly

i would also do your brakes (new pads, rotors, fluid) and add an oil cooler.

Just got a 90 model GTR?

The first mod you should be doing is a major service.

True, at least all fluids, tyres (if you imported it) and a check over and clean.

After that, drive it around for about 2 months to see if you can 'feel' anything wrong with it before modding.

Also, I got mine dynoed before I did anything to see what the power and boost curves looked like and see if they held steady or spiked/dropped off.

Just got a 90 model GTR?

The first mod you should be doing is a major service.

This goes without saying (but ill say it anyway), change all the fluids - you dont know when they were last changed......if at all.....

i just got a R32 GTR as well, leaving it stock for the moment just to see if there is anything wrong. Don't wanna spend all the cash modding then if something goes bang, your in trouble. Unless money is no issue :P

I've put in a set of XENONs though, but it doesn't go any quicker :D

Edited by gexenon

Just keep the boost at no more than 15psi with the other things mentioned above and you should be fine

And yes, that power (260) will happen with the mods mentioned above, unless theres a problem with your engine

yes a stock GTR is around 180 - 200kw on most dynos. a few kw more with exhaust etc.

i would go.

boost controller (run 1 bar boost)

apexi pods in a custom box3 inch cat back exhaust

front pipes

dump pipes

Power FC

cam gears (both inlet and exhaust)

and you will get around 240-260rwkw if everything is working properly

i would also do your brakes (new pads, rotors, fluid) and add an oil cooler.

Mine has all that less those couple of things and does over 250rwkw. Also need rising rate fuel reg. Plus for that boost level steel wheeled turbos is a handy insurance. I lost a good engine to a blown ceramic turbine as the crap often gets forced into the cylinder causing nasty damage.

Additional to all other suggestions I recommend the timing belt/pulley bearings be replaced ASAP as well as new grade 8 bolts for the bearings.

  • 5 weeks later...
sweet got more replies than i thought

im definatly doing the full fluids change and i was planning to wait a while before trying to get more hp

another question for yas

can my 32 get 240 -260 and still last a while or is it prone to go bang????

I can only tell you of where i went

100K service, doesnt matter if its got 98K or 50K on the clock, you will have a sound base to work from

Redline fluids

Brake fluid

3inch exhaust

front pipe

power fc

boost controller (1 bar)

Adjustable cam gears (both)

= 250rwkw

+ some drag racing

= "hey whats with all the smoke and where is all the power!" (Damn ceramic wheels!)

IMHO Whatever you do be realistic about your expectations and consider the risks.

I dont know your circumstances but if you want to start spending cash on it by all means go nuts.

I did; now i'm asking the forum questions about mods on a 300rwkw combo and contemplating the rebuild next year

....but if you dont, get the service, get a new stereo (is that what young ppl are calling them these days?), fix stuff that becomes an issue

and enjoy driving it for a while...After all it's a still a GTR

Edited by Mr. Keets

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Evening fam, Pretty much what the title asks, I have looked all over and can’t find a proper answer expect one post from almost a decade ago which is vague. ive seen photos and they look pretty much identical, would an r33 GTR N1 reo work on an r32? reason I ask is they are cheaper to buy… $700 compared to 1k+ for an r32 n1 reo
    • Couldn't help myself, had to start putting it together.... It really is a solid bit of kit.  Probably stronger than i would have made it myself to be fair! 🤣🤣 Sweating like a pig after that.  Bloody hot and muggy day today, time for a swim now!
    • Yeah was thinking that. I've had the car go lower idle possibly around 650rpm every once in a long time after pouring fuel and would sound quite rough like a misfire, almost like it's shit fuel or something but who knows.
    • @Wazmond you are correct, my bad, was not my intent    https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.    I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.    I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.    https://gtrfestival.com.au
    • Just buy a bunch of covers off aliexpress, they're like $5 each. Rattle-can them and stick them on as needed/fly off.
×
×
  • Create New...