Jump to content
SAU Community

Looking For Some Answers?


Recommended Posts

Hey guys,

Just wondering how much you think second hand Trust suspension is worth? I will try to get some photos up tomorrow.

Heres a few details:

Came off a 1991 32 GTR.

Light blue in colour with darker blue springs.

Black knob with 1 - 8 on it (as you can tell im not a suspension know it all).

Appears to be no leaks.

They have the letters KYB and 2GI0.

I know the info is a little vag. but any help would be appreciated.

Cheers.

post-23674-1143001627.jpgpost-23674-1143001641.jpgpost-23674-1143001662.jpgpost-23674-1143001695.jpgpost-23674-1143001706.jpgpost-1777-1125302755.jpg

post-23674-1143001716.jpg

Edited by Extacy
Link to comment
Share on other sites

KYB 2G is obviously the brand KYB by all accounts

AGX is the form you are describing with 8 way adjustable dial.. far too soft to be useful on lowest setting... decent at middle and you'll pretty much be driving around with it dialed in as hard as possible.

not sure where trust comes into it ... obviously with the info provided its a little unclear on all the bits.

KYB 2g AGX are used in some skylines but fairly rare so some pics would be great so verify my "beliefs" here.

if these are indeed what i suspect normal cost is around 230 a corner.

Danz

Edited by Danz-
Link to comment
Share on other sites

KYB sell their shocks to all sorts of people who stick their own brand on them. Look for oil and gas leaks, compress fully and check the damping still works and that there is gas pressure. Shake and listen for rattles. KYB's are notorious for leaking and then falling apart internally.

:( Cheers :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...