Jump to content
SAU Community

Recommended Posts

Hi,

I had an idea and I assume that there is either a problem with it or it is already a product - if it is who makes it.

Many believe that the stalling / backfiring that Skylines put on show is the result of non-plumbback BOVs and that the real cause is the use of AFMs on Skylines. My understanding is that computers using MAP sensors remove this issue - however this can seem expensive to some people. My idea is a MAP sensor that plugs into the plenum (as MAP sensors do) with the wiring plugging in to the the AFM plug. The unit will be calibrate so that the sensed pressure is converted into the same 0-5 volts that the computer gets from the MAF.

Put simply, this unit is a MAP sensor that the car thinks is a AFM - removing the need for a AFM and removing the stalling, backfiring problems associated with non-plumback BOVs.

Any thoughts?

Link to comment
https://www.sau.com.au/forums/topic/110615-new-product-to-remove-afm/
Share on other sites

i only have one problem with this idea.

i have had a GTI-R with afm and trust BOV (vented to atmosphere) with smooth idle, no stalling ever. both with a stock ecu, a mines chipped ecu and a stock ecu with daughter board and custom chip

i also have a GTR with twin blitz BOVs, both to atmosphere. I've run it with stock ECU and Power FC and both time it idle smoothly, never stalled. no problems at all.

Which bring us back to the

THIS LOW RPM ENGINE STALLING SAGA POSSIBLY SORTED thread.

http://www.skylinesaustralia.com/forums/in...view=getnewpost

I have found that when I plumb by BOV back everything is ok. When I go atmo it seems to turn pear-shaped.

I don't mean to be rude -- I gues this thread would be more for believers that the AFM is the issue (I guess anyone whi has bough a HKS EIDS! : ) )

Hi,

I had an idea and I assume that there is either a problem with it or it is already a product - if it is who makes it.

Many believe that the stalling / backfiring that Skylines put on show is the result of non-plumbback BOVs and that the real cause is the use of AFMs on Skylines. My understanding is that computers using MAP sensors remove this issue - however this can seem expensive to some people. My idea is a MAP sensor that plugs into the plenum (as MAP sensors do) with the wiring plugging in to the the AFM plug. The unit will be calibrate so that the sensed pressure is converted into the same 0-5 volts that the computer gets from the MAF.

Put simply, this unit is a MAP sensor that the car thinks is a AFM - removing the need for a AFM and removing the stalling, backfiring problems associated with non-plumback BOVs.

Any thoughts?

HKS have been making such a device for many years, it’s called a Vane Pressure Converter (VPC). From its name you can tell that it’s been around since vanes were used in AFM‘s, before hot wires became common.

MAP sensors measure changes in pressure which is useful up until the boost controller holds the boost stable. From then on you have no pressure changes for the MAP sensor to see. So they are useless from that point onwards. So you have one dimensional mapping at WOT, ie; only the rpm changes tell the ECU what point on the MAP to use.

This is obviously not the case with an AFM, they report changes in airflow to the ECU for as long as their resolution allows. Consequently at WOT you have 2 references to map against, rpm and engine load. That gives a superior result.

MAP sensors also have a host of problems with the pressure pulses from multiple throttle bodies, hence are very tricky to tune on GTR’s.

Be careful that you are not removing one small problem and creating 2 other large problems in its place.

:laugh: cheers :D.

I knew that I wouldn't have been the first to think of this! I don't know much about MAP sensore - just what I learnt from threads / articles about stalling and AFMs.

SK - I guess that since the HKS unit is so old it wouldn't be applicable for an RB20?

Also, how much of the AFM's resolution is committed to being on boost - I guess the question would be - when vacuum / boost is zero what is the output voltage of the AFM (I realise that it would be 0 if the car is not on).

Which bring us back to the

THIS LOW RPM ENGINE STALLING SAGA POSSIBLY SORTED thread.

http://www.skylinesaustralia.com/forums/in...view=getnewpost

I have found that when I plumb by BOV back everything is ok. When I go atmo it seems to turn pear-shaped.

I don't mean to be rude -- I gues this thread would be more for believers that the AFM is the issue (I guess anyone whi has bough a HKS EIDS! : ) )

not denying that you have a problem with your car you cant fix, but i can tell you in my own experience i have not had a problem running atmo venting BOV in a couple of nissans. perhaps you need to look a bit more into your cars problems because i know many people running atmo venting bovs on various skylines without any bother at all. perhaps venting the bov to atmosphere on your car is just highlighting another problem (another air leak in your inlet tract perhaps) which isnt noticable when it's plumbed back.

Also, how much of the AFM's resolution is committed to being on boost

some aftermarket ecu's use a map sensor instead of the afm, however as sk mentioned once you are on full boost the ecu only has one reference (engine rpm)

the fuel and timing tables in nissan ECU's are a 3dimentional graph showing...

Engine RPM vs Theoretical Pulsewidth (TP is calculated based on AFM voltage, RPM and K value)

so depending on what the engine rpm and TP is, is where on the ecu's maps the data is read from, if you are on full boost - the car will be reading the same manifold pressure and can only use rpm as a reference, as opposed to with an afm where it will still read changes in airflow when on full boost.

It's arguable whether this matters or not,

To answer your question, when tuning doing wot runs on my car, when holding say 10psi of boost the TP is more or less the same for that period, with the exception perhaps of very minor fluctuations.

So anyway, in my opinion, if map sensors are good enough for well known aftermarket ecu's to start using to replace afm's (eg. apexi powerfc djetro, hks fcon...), then i don't see a major problem there. I wouldn't say they were better or worse, an advantage is you get to f**k off the afm, which also can cause problems maxing out the voltage (and have to upgrade to z32 or q45 etc.), at the end of the day, why bother if the afm does the job? the cost of a new afm will be far less then the cost of a map sensor & ecu remap.

Edited by MerlinTheHapyPig

Alot of people say they don't work / help - this could be because they are used out of context (Zoom's artilcle of the unit says that it is used to stop reversion which they describe as air coming forward out of the turbo and cooling the wire in the AFM (when cars have big turbos)? rather than to stop air leaking out through an atmo BOV) or as Beer Baron is suggesting all of the people suffering this problem have wider issues other than atmo BOVs.

Do the EIDS work - they are quite different in concept to the HKS VPC Sydney Kid was talking about?

I guess its a bit of a funny one. The STALLING SAGA thread seems to have divided people into two schools of thought - those who believe the AFM is the culprit and those who don't. I don't know the answer but I am fascinated that so many people have a common problem and no-one knows the answer!

it is used to stop reversion which they describe as air coming forward out of the turbo and cooling the wire in the AFM (when cars have big turbos)? rather than to stop air leaking out through an atmo BOV)

yep, spot on. the EIDS pro and the VPC are 2 different things. i really think if there is a problem with running an atmo BOV on an AFM equipped nissan then something either in it's installation, or adjustment or another problem alltogether is causing the stalling problem. as i've owned and been in a number of otherwise standard skylines, silvias etc with atmo bovs and stock ecus and they ran just nicely. steady idle, no stalling.

A little off stopic but I didnt want to create another thread for this....

If you have a D-Jetro and still have the standard AFM's, does unplugging the volts supply from them make them permanently open or closed? or is that the wrong 'action' of an unvolted AFM?

Wow I knew there had to be other people with this idea in mind. I also want to add another reason for this maf-map convertor besides the low rpm stall. s14 SR, RB20 and RB25's do not have a d-jetro version of the powerfc. This means if you go with a top mount turbo with 4" inlet, you have to have a super tacky looking 4"-3" adapter to hook up the maf in front of the turbo. This absolutely kills the look of nice top mounted turbo.

Another Idea I had was to make a maf sensor and flange that can be installed in the ic piping. Essentially making it a blow-thru maf setup rather than a draw-thru. If nissan freakin made the maf sensor removable from the housing like other manufacturers this would be a very realistic idea.

-Bluefire

Essentially making it a blow-thru maf setup rather than a draw-thru. If nissan freakin made the maf sensor removable from the housing like other manufacturers this would be a very realistic idea.

-Bluefire

Has any one plumbed the AFM as a blow through setup?

Wouldn't be too hard to plumb in just b4 the throtle... Just a thought

Hi,

As I understand it the AFM tells the ECU how much air is coming into the car using a wire which is warmer (I guess) as less air comes in and cooler as more air comes in. Before the turbo the air would be at a largely ambient temperature, whilst after the turbo the air would be significantly warmer - would this make a difference to the reading of the AFM?

Thanks.

A little off stopic but I didnt want to create another thread for this....

If you have a D-Jetro and still have the standard AFM's, does unplugging the volts supply from them make them permanently open or closed? or is that the wrong 'action' of an unvolted AFM?

an air flow metre on a GTR is nothing like what you are describing. it's a pipe basically with a hotwire sensor inside. it doesnt open or close, or twist or turn or anything really. it just sits there. air flowing over the sensor cools the sensor which causes a change in the AFMs output voltage.

can i ask why do you want a djetro if you are leaving the AFMs there? just buy a normal PFC.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...