Jump to content
SAU Community

Dynamat Extreme Bulk Kit - The Best Sound Deadener!

tyger

By tyger,
in For Sale (Other Items)

 Share

Recommended Posts

tyger Contributor

tyger

Posted
Posted

Hi,

I bought two brand new Dynamat Xtreme Bulk Paks for $299 my local car audio shop. I was planning to seriously sound deaden my whole car, but have since bought a new car and no longer need them.

They have never been opened and 1 kit will easily sound deaden your whole car. With Each kit containing Nine 45.7cm x 81.2cm pieces.

I am looking for $249 each or $239 each if you buy both. Pick up in Hills Area Sydney ok or willing to post $19 Aust Wide courier.

Please contact me on [email protected] or 0405 909 347.

d7.jpg

What Dynamat Says:

Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.

High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective and requires no heat to apply!

It is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18" x 32" pieces of Dynamat Xtreme for a total of about 36 square feet (a car door requires about 5 square feet).

Can be used for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.

Dynamat Bulk Pak

Part Number: # 10455

Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme

Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

tyger Contributor

tyger

Posted
  • Author
Posted

Guys?

Anyone interested???

$239 I gotta get rid of them. Huge saving off RRP and they're the best quality stuff you can buy.

Hi,

I bought two brand new Dynamat Xtreme Bulk Paks for $299 my local car audio shop. I was planning to seriously sound deaden my whole car, but have since bought a new car and no longer need them.

They have never been opened and 1 kit will easily sound deaden your whole car. With Each kit containing Nine 45.7cm x 81.2cm pieces.

I am looking for $249 each or $239 each if you buy both. Pick up in Hills Area Sydney ok or willing to post $19 Aust Wide courier.

Please contact me on [email protected] or 0405 909 347.

d7.jpg

What Dynamat Says:

Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.

High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective and requires no heat to apply!

It is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18" x 32" pieces of Dynamat Xtreme for a total of about 36 square feet (a car door requires about 5 square feet).

Can be used for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.

Dynamat Bulk Pak

Part Number: # 10455

Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme

Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      How "plug and play" is the Haltech Pro for R33 GTST

      By MBS206 · Posted

      What are your plans for your blow off valves? Purely plumb back? How soft will the spring in them be? AFM can be tricky to get super smooth and nice, especially depending on the rest of the system, and then can be very easily upset if something slightly changes. IE, even if you run recirc blow off valves, you could still see issues getting it to behave at certain load points as turbos might start to spool, but you release the throttle but it's not enough pressure to crack the bov open to recirc, and you can end up with reversion which can cause double metering, and hence dumping of fuel into the system, and stalling the engine.   If you're going to run a map sensor for closed loop boost control from the ECU, what makes you want to keep the AFM?    
    • Dose Pipe Sutututu
      How "plug and play" is the Haltech Pro for R33 GTST

      By Dose Pipe Sutututu · Posted

      It's not bad, it's just not flexible. And say if you have any leaks between the MAF and plenum, well then your load axis goes out the window. Here's a real world scenario, I blew off an intercooler hose last track day, as the clamp decided to Bluetooth itself somewhere. Still continued to do 2 laps and drive it to the pub for a couple of beers then home. Good luck doing that with a MAF setup 
    • joshuaho96
      How "plug and play" is the Haltech Pro for R33 GTST

      By joshuaho96 · Posted

      Is MAF load really that bad? I'm not trying to do big power, my only real desire is VCAM and flex fuel support so I'm not terrified of blowing my engine apart from CA's appalling 95 RON "premium" fuel. Stuff like playing with closed loop boost control and really dialing in my transient fueling and ignition are frankly just to prove to myself I remembered something from uni.
    • PotatoCake
      Alarm/immobiliser recomendations for an R33

      By PotatoCake · Posted

      Thats what ive been doing. Ive got a million questions but i know theyve probably all been answered before at some stage. Todays research included nismo heritage seat covers, s3 projector headlight retrofits and how to remove/paint the rocker covers 
    • R3N3
      Alarm/immobiliser recomendations for an R33

      By R3N3 · Posted

      Legend, thanks!
×
×
  • Create New...