Jump to content
SAU Community

Recommended Posts

OK, my left shock has blown on my r32. since the rest of the shocks are the same age (they are KYB buzzspec shocks with what i think are the stock springs), its time to upgrade!! Might as well do it right the first time (stuff getting stock struts and springs).

Of course theres the Tein Super Streets from fulcrum. everything i hear is good about them, but the price is a little "average" for me, about $2000 installed.

I found a guy in adelaide who has HKS Hypermax D coilovers, which have 5000km's on them. I dont know the spring rates on them yet, but he reckons they are in good condition. They are $1200 apparently.

Both sets of coilovers are height and dampener adjustable.

This is the dilemma. The teins will be brand new, so I know what abuse they have had (ie. none), while the HKS are unknown (5000km's of drifting has to produce a bit of wear right?). the tiens also have a 2 year, 40K warranty.

To get the HKS's i guess freight will need to be payed, so thats an extra $70, plus i need to put them on (i guess i can do that myself, or get a mate), and then get them aligned and adjusted properly, about $100. so that brings the HKS's to about $1400. fair bit less than the teins.

I admit im a noob at suspension, I dont know much....i would love to hear your opinions guys! :P

Link to comment
https://www.sau.com.au/forums/topic/110762-tein-super-street-or-hks-hypermax-d/
Share on other sites

Well out of those choices I'd pay the extra money and get the Teins which are brand new and have a warranty etc etc..

Personally I'd find a used set of Teins for $700 like my mate did.. they work fine.. worst comes to worse you can get them rebuilt by Fulcrum.. still costing less than brand new ones I would imagine.

BTW How do you know for sure the HKS ones have only done 5000kms? Also you say you need to get them freighted so I imagine you don't live nearby. Personally I would rather get to check them out in person before I bought used suspension.

If you can afford it though you should buy the new suspension rather than taking the risk with the cheaper used suspension.

My 2c.

yer, the seller is in adelaide, im in brisbane. so its hard to verify. he just claims they did 5k. its just like buying off a yahoo auction...could be dubious.

and if the HKS need reconditioning, i midas well get the brand new teins.

also fulcrum is 5 mins drive from me, they are so close.

i had hypermax-d's and i sold them and got whiteline suspension. i doubt they would be that new im not even sure they make them anymore... when i sold mine i didnt know how many ks exactly but i told the guy at least a few years worth!

anyway if you are really set in getting japanese coilovers just shell out the extra and get the aus spec teins they will be heaps better overall than the hyper-d's.

or even better buy bilstein shocks and whiteline springs plus adjustable bushes and swaybars which you could get for approximately the price of the teins.

btw i think 1200 for any second hand shocks is not a fair price unless you know 100% that they are very close to new. i sold mine for 500 plus postage.. much more and i would have felt i was ripping the guy off :P

edit: also wanted to add that with the whiteline suspension i have now i you can drive a lot faster over almost any road when compared with the coilovers.

Edited by siksII

Ouch! that works out at 450 for installation based on what i paid for a set about a month ago! Retail is only $1865.

Seems a bit pricey to remove 12 nuts and replace if you ask me. It'd want to include a 4 wheel alignment at least.

For reference, the first time i ever swapped struts it took under 2 hours from start to finish with no outside help. That included removing and reinstalling the boot trim

i just had the teins installed for $2000. feel a bit softer than the original kit, but much nicer ride. played with the settings today and full hard is a fair bit stiffer than the originals. full soft is nice for cruising. i set about 4 clicks off full soft and it seems a nice balance. drilled a couple of holes thru the boot trim to be able to access the rear adjustment (bit cheaper than the edfc kit) and you cant even see the holes. easy as. plus it sits about 15mm lower than standard, which is about right. have scrubbed the inside of the tyre well a couple of times (only the plastic inner guard liner) but i have very fat 265/35's so all in all very happy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...